craig
Supporting Sponsor, Overland Certified OC0018
It is on the front brush guard now (my favorite spot), but in the picture on the far right it is stored inside the truck behind the 2nd row seat. Here is how:
- Remove the base
- Remove the Top piece used for winching or squeezing.
- Fold the right rear seat back forward
- Put the base end of the jack on the cargo area floor just behind the seat and the top end of the jack between the plastic and the seat back that you folded forward.
- Bring the seat back, back, and lock it into place with the tip of the jack wedged between the seat back and the plastic.
- Put a tie-down of some sort on the base end of the jack and around the bracket that holds the seat to the floor.
If only I could find the picture. It is simple, easy, out of the way and easy to get to. To get to it, you don't have to unload the back, you just open the rear doors, fold the seat back forward and slide it out.
Craig
- Remove the base
- Remove the Top piece used for winching or squeezing.
- Fold the right rear seat back forward
- Put the base end of the jack on the cargo area floor just behind the seat and the top end of the jack between the plastic and the seat back that you folded forward.
- Bring the seat back, back, and lock it into place with the tip of the jack wedged between the seat back and the plastic.
- Put a tie-down of some sort on the base end of the jack and around the bracket that holds the seat to the floor.
If only I could find the picture. It is simple, easy, out of the way and easy to get to. To get to it, you don't have to unload the back, you just open the rear doors, fold the seat back forward and slide it out.
Craig