305/70x16's on 7in rims?

[Boston Mangler]

bad idea?

pros and cons?

thanks

[paulj]

According to the spec table for BFG KOs in this size, the rim width range is 8 - 9.5". You could look up the specs for other brands, but I suspect 7" is too narrow for this tire. I don't know what the consequences are for going against the manufacturer's recommendation.

paulj

[Scott Brady]

It will work, but you will get crown wear at an accelerated rate. I have mounted 12.5" tires to 7" rims before. Just keep an eye on tire pressures and rotate every 5,000 miles.

[pskhaat]

I wouldn't hesitate to mount 'em on a 7". I've seen lots of folks with 35x12.50s on 7" wides and without issue.

[Boston Mangler]

Reason i ask if because i have some 305/70-16 MTR's on my stock 16x8 alloys.

I just picked up a set of 16x7 steel factory tundra rims with the correct backspacing for CHEAP $.

I am going to get a set of more street friendly tires for longer trips and i am trying to decide what goes where. I will most likely put the street tires on the steel rims and go with the 285/75 flavor! :D

Thanks for the input!

Kevin

[calamaridog]

Bad idea...

I'll take those 305's off your hands for you:sport_box

[Scenic WonderRunner]

We know where you got those Kevin!

Craigslist!!!!!!!!

We know you love it!......hehe:elkgrin:

The only place in the world you can get used Toyota parts for cheap.....and a cheap date.......oops.....I mean a date......with just a few clicks of your mouse!!!:p
.
.

[Boston Mangler]

We know where you got those Kevin!

Craigslist!!!!!!!!

YUP!!

$100 for the stock 16x7 rims with the perfect 80 series BS of 4 1/2"