Adding a second fuse block write up... with pics

[Rezarf <><]

I know a lot of my amigo's over here don't get over into Mud so I thought I would post up a link of the 2nd fuse block install over here for anyone looking for a "how to"

Here is the link, enjoy. (http://forum.ih8mud.com/40-55-series-tech/217352-second-fuse-panel-picture-write-up.html)

I hope someone will find it useful. Thanks for all the help I receive on this board! :D:friday:

[Tress]

Very nice! Yes this is a very helpful visual, i have been trying to figure out a 12V design for some time now and and have been very confused about this part of the system. So from the battery you go through a fuse and then directly into the panel, why not ground everything to the frame? Either way, thanks for the pics, i like the panel but defeinitely not enough space, i have been looking at the Del City stuff.

[Rezarf <><]

Thanks man, everything does ground to the frame in the end ;)

I like to run everything to and from the battery through good corrosion free conductors, as my rig is 31 years old this year! I can't always count on a bolt being corrosion free. That is my main reason for running all the ground wires. The second is everything is in one place for diagnosing. My days of under-dash contorting to see wiring are over! :D

[Reinhold]

Very nice!
Where can a guy pick up a multi gauge wire connector that you hooked up to your battery?
Thanks for the info...it answered a lot of questions for my next project.

[Rezarf <><]

Any car audio supplier, be warned they are expensive.

Drew

[Reinhold]

One more question....what size of fuse did you install between your battery and fuse box?

[Rezarf <><]

Just add up the total of your fuses in the block then get one a little bigger. I am running a 60amp fuse.

thanks!

Drew