PDA

View Full Version : 06 Pathfinder



RakkasanFA
04-28-2008, 06:23 AM
Are there any other lift kits out there for the Pathy besides the PRG one? I don't want to go any higher than 2 inches.

Thanks.

greybrick
04-28-2008, 06:48 AM
Welcome to the forum Barry. There's a good bit of information about lifting the 05+ PF's over on this site, as well as some other info specific to the model;

TheNissanPath (http://www.thenissanpath.com/index.php)

I've been toying with the idea of putting on 08V8 PF Nissan OEM front struts/coils and rear coils and shocks on an 07V6 which should give about an inch lift all the way around and stiffen the ride somewhat, but there a few other options to look at yet.

.

mountainpete
04-28-2008, 06:54 AM
PRG is just a spacer kit right?

There is very little after market support for the 05/06 R51 Pathfinder. However, I believe that Old Man Emu (ARB) has a lift for your truck that I think will do just over 1".

For the front, there is a stock or medium version (medium is better if you have a winch) and the rear there is a stock or a heavy option that is for people who always carry a few hundred pounds. Just a guess here, but I'm thinking around $850 for front & rear (don't quote me on that!).

There are a bunch of ExPo sponsors that sell OME - just give one of them a call for a quote. The list of vendors is at the bottom of the home page (http://www.expeditionportal.com/).

Pete

RakkasanFA
04-28-2008, 09:11 AM
PRG is just a spacer kit right?

There is very little after market support for the 05/06 R51 Pathfinder. However, I believe that Old Man Emu (ARB) has a lift for your truck that I think will do just over 1".

For the front, there is a stock or medium version (medium is better if you have a winch) and the rear there is a stock or a heavy option that is for people who always carry a few hundred pounds. Just a guess here, but I'm thinking around $850 for front & rear (don't quote me on that!).

There are a bunch of ExPo sponsors that sell OME - just give one of them a call for a quote. The list of vendors is at the bottom of the home page (http://www.expeditionportal.com/).

Pete

Yes. The PRG is 2" spacers all around. I will look at the other sites to see the OME suspension.

Trogdor
04-28-2008, 02:31 PM
http://npora.ipbhost.com//index.php?showforum=23

Check this site out it will give you alot of information for your pathfinder

greybrick
04-28-2008, 04:25 PM
Here's the ARB catalog (http://www.arbusa.com/accessorize_your_rig.php) showing the Old Man Emu suspension for the 05+ PF's;

ARB Pathinder accessories (http://www.arbusa.com/USA-Vehicle-Application-Guides/Nissan-Pathfinder.pdf)

Like most suspension modifications the alignment has to be reset for the OME upgrade to work right. Without adding a front steel bumper or additional weight such as a trailer in the rear most are seeing about 1.5" lift at the front and about 2 1/2" at the back measured above the tires, with the medium spring front / medium spring rear mod.

.

mcm4090
04-28-2008, 09:10 PM
Everything that is out there for the front of a Frontier will work for the Pathy front end.

RakkasanFA
07-11-2008, 01:58 AM
I just found that Calmini has a 5" Pathfinder lift. That is a BIT much more than I would want but its still cool.

http://www.purenissan.com/2005_preview1.htm