PDA

View Full Version : Garmin Wilderness Roof Rack (Jeep etc)


dieselcruiserhead
09-26-2009, 05:44 AM
This is a Garmin Wilderness Rack originally designed for a Jeep Wrangler with a soft top. I'm pretty sure I have all the bits (not 100% though -- I guess I'll have to check) for an actual Jeep install but it could bolt to anything and probably still look good.
Here is a photo of what it would look like installed on a Jeep (not my jeep):
http://4x4icon.com/offroad/oak_ridge_100402/road_ready_02.jpg

Only asking $150 OBO (retails for about $900 or so) mostly because there is rust developing (but no rot) and in my opinion it will need a sandblast and paint/powdercoat fairly soon. There is a sand blaster/powdercoater near me so I can potentially look into this for you if you would like.

Here are some relevant links with specs, etc.
http://www.shopatron.com/products/productdetail/part_number=44074/723.0
http://4x4icon.com/offroad/rack/rack.htm

It also breaks into small pieces for easy shipping in a long box I figure about 12" wide or so. I have no idea what this would run but can find out.

Thanks,
Andre

http://www.expeditionportal.com/forum/attachment.php?attachmentid=32837&stc=1&d=1253943876
dieselcruiserhead
10-08-2009, 04:27 AM
Top, thanks..
ThunderAZ
10-09-2009, 01:21 AM
What are the dimensions of the rack? WxLxD
dieselcruiserhead
10-09-2009, 03:51 AM
54" x 72" x 4" tall.. Thanks, Andre
ThunderAZ
10-10-2009, 02:14 AM
PM sent
dieselcruiserhead
10-16-2009, 03:19 PM
Still here. To the guys who requested the Jeep connector parts I realized I must have recycled them in the spring when we did a cleanup. Asking $250 OBO for the rack/basket component. $280 Shipped OBO.

thanks,
Andre
brdavis9
08-21-2010, 06:10 PM
Hi - Did you ever sell this? I'm looking for parts for the Sac' Craigslist one I recently purchased used (it was $300 btw, and included most of the necessary TJ mounting bits, but I'm a few center bars short; and I don't mind the rust ...I can sand and rattle-can it as necessary). Thanks.
dieselcruiserhead
12-08-2010, 09:38 PM
To the top for this old thread. It was priced so high because I was planning on possibly using this. I still have it and am way way more flexible now for anyone interested...

thanks,
a
blackmonte
12-08-2010, 09:58 PM
PM sent
brdavis9
12-08-2010, 11:35 PM
PM sent
dieselcruiserhead
12-09-2010, 03:29 AM
Hi guys, going in order. Thanks...