Parts....for your 1st Generation Toyota 4Runner

[Scenic WonderRunner]

Parts for your 1st Generation Toyota 4Runner


I'm starting to find that some parts are getting hard to find unless you can get a Govt. Bailout to be able to afford to buy it from the Toyota Dealer.


Post up your 1st Generation Toyota 4Runner parts needs and links to find.....here.


We can use this thread to help fellow members find good used parts/or good deals on new parts..... that you may find in your local area. Hopefully we can help each other find parts, save money and help keep our 1st Gen. Alive!



My current part need.

I'm looking for an "Igniter". The small metal electronic box that sits on top of the coil. This part is $545 at my local Toyota Dealer! Yikes!

For my 1988 Toyota 4Runner with the 3.0V6.

I found a junk yard south of San Diego that will sell me a used one for $50 bucks. But he checked and he is out of them. I spent two hours on the phone today, trying to find one with no luck.

A used Igniter for my truck can Only be for a 1988/89. Or, my Toyota dealer told me I can also use the MR2 Igniter for 1988/89. I'm going to check on a MR2 locally, in the morning.


Here is a pic of the part.

See metal box on top of coil and Green Plug. Would you want to spend $545 on that? For God's sake!

http://i71.photobucket.com/albums/i156/ScenicWonderRunner/2009_12091stGenIgniter0004.jpg

And it's almost pitiful that a junk yard wants $50 bucks for this 20 year old electronic part that probably has 200K miles on it, when you can hardly get $25 bucks for a much newer used TV!....UG! Sorry! Just venting. Must have been the two hours on the phone today!

.

[pray4surf]

Do you have a part number?

I take it this is the culprit to your engine problem you and I discussed?

[Scenic WonderRunner]

Thanks Rick,

You can see two labels in the pic.

One label are numbers for "coil/igniter".

The other label is for "Igniter Only". I can't read the last digit on the Igniter Only. It's messed up.

Here goes.


"Coil/Igniter"...... 19070-35190. ..... next just below 101311-5380 .



"Igniter Only" ..... 89620-12970 <~this number is very faded and hard to read. This may be wrong.


I would say all Igniters would have both Labels on them. So the top two sets of numbers should work (coil w/igniter.




.

[881stGenRunner]

hey SWR, mine went out too. Truck would not fire at all. I believe it was a code 14. My dad and i tried to use one from an MR2 and it turned out to be the incorrect one. You have to go with one from a 1988 3.0 ONLY. i dont even think you can use the one from 1989

[Mr. Leary]

Great idea for a thread. I am planning a trip to the junkyard here soon, and will check on the parts for you! We have a place here locally called "Toyota Heaven."

Other advice is to send Roger Brown an email... he probably knows some good places to start.

[Scenic WonderRunner]

Great idea for a thread. I am planning a trip to the junkyard here soon, and will check on the parts for you! We have a place here locally called "Toyota Heaven."

Other advice is to send Roger Brown an email... he probably knows some good places to start.

Thank You Mr. Leary!

We all know there are Thousands of junk yards all around this country. And I bet most of them do not have websites or communicate well on the net.

I could never find that perfect junk yard in Texas, or anywhere else on my own.

Thus....the purpose of this thread.



Thanks!


.

[pray4surf]

IIR - there is a similar thread in the SoCal TTORA forum. Can't locate it right now - I'll see if I can dig it up tomorrow

Could TRDPart4U beat the local dealer's price?

[Scenic WonderRunner]

IIR - there is a similar thread in the SoCal TTORA forum. Can't locate it right now - I'll see if I can dig it up tomorrow

Could TRDPart4U beat the local dealer's price?


The part never showed up on my search at their website.




.

[pray4surf]

Don't bother with their website...

Give Barb or Gerone or Phil or Jacque a call today 866 233 4305 - Let them know that you are an ExPo member and ask for their best price...

Have your VIN handy

You may want to bite the bullet and get a new ignitor - You take your chances with a used one - just my $0.02...

Course (as with any electrical component) even TRDParts4U won't allow you to return it :(

You have the 3.0L motor or the 22R? - nevermind. I don't seem to retain a lot of what I read :D

[TRDPARTS4U]

The Igniter is $393.28 part number 89620-12270. Shipping is $10.49.
This part is readily available.


As Rick stated electrical parts are not returnable.

www.trdparts4u.com is our accessory site.
www.toyotapartsales.com is our replacement parts site.

If in the future you are having trouble finding something please email us at :

info@trdparts4u.com Gerone, Barb and I get these emails.

Or you can call our toll free number 866 233 4305 if no one answers please leave a message.


I hope this helps.

Jacque

[java]

ignitors are known to die every now and again on the older trucks. i kept a spare one in my 85.
but those dealer prices are insane! try a wanted ad if you dont need it fast, on pirate or yota tech or something

[pray4surf]

Could have sworn there was a listing of SoCal salvage yards on TTORA, but I can't seem to locate it this morning...

Rancho Toyota Recycling (aka MST Recycling) I've had success with

Here is the link to their 4Runner page of your vintage
http://www.ranchotoyotatruckparts.com/84-89-toyota-4runner.html

I've had great luck talking to Jonathan.

[Asha'man]

At the moment I'm looking for a rear wiper blade assembly for my '86. I've been looking since, oh, about 6pm yesterday, so the search hasn't borne any fruit yet, but I'm planning on calling the dealership this week. The problem lies in the fact that the wiper blade is permanently attached to the piece that attaches to the wiper arm, and no standard wiper refills will attach the same way. I'll update with what I find out.

[Scenic WonderRunner]

Asha'man,

If your rear wiper blade assembly is like my 1988, and held on by two screws at the tip of the arm. I picked up one from the Toyota dealer in Nampa. ID. a couple years ago for just $12 bucks brand new. Ask your local dealer.


~~~~~~~~~


I'm currently trying this parts wanted ad on my local Craigslist. With pics.

With no luck.

The junk yards here price their Junk like Gold!


http://sandiego.craigslist.org/nsd/pts/1507659562.html


Wanted: 1988 Toyota 4Runner Parts.

1. IGNITER.......this is the electronic box that sits on the ignition coil.

2. INCLINOMETER......The three gauge pod with altimeter and tilt o meter (in Gray, must match my dash)

3. Looking for Toyota truck take off wheels and tires in great condition ( 31"x10.50x15 )

4. TRD Electric Locking 3RD Member Complete with wire harness w/ 4:10 gears





.

[TACODOC]

Have you posted your shopping list on TTORA?

Lots of 1st gen parts FS there and on Yotatech

[Scenic WonderRunner]

Thanks Dave!

Maybe you can post it up for me?!!!:sombrero:

I have No interest in signing up for any more/new 4x4 website frustrations and punishment!:elkgrin:

In my 40 years of Vehicle ownership (it all started with a used/mint 1969 VW Beetle)....I must say that this Toyota Igniter is the most frustrating and overpriced part I have ever run across!




.

[djrez4]

Jeez...maybe I should just give up on selling and part out the two spare 4runners I have sitting around...

[toyota_jon]

SWR i sent you a pm the other day, i know a guy here locally who has an '89 ignitor he is selling. are you interested?

[Asha'man]

Asha'man,

If your rear wiper blade assembly is like my 1988, and held on by two screws at the tip of the arm. I picked up one from the Toyota dealer in Nampa. ID. a couple years ago for just $12 bucks brand new. Ask your local dealer.

That's the one. I'd forgotten to call the dealer till you reminded me, thanks. :)



3. Looking for Toyota truck take off wheels and tires in great condition ( 31"x10.50x15 )


I have a set of 31x10.50x15 TrXus MT's, dismounted. Two are stellar, two are worn funny from a bad alignment and a long commute. I'd get rid of the good ones for cheap, PM me.

[BIGBOCK]

Thanks Rick,

You can see two labels in the pic.

One label are numbers for "coil/igniter".

The other label is for "Igniter Only". I can't read the last digit on the Igniter Only. It's messed up.

Here goes.


"Coil/Igniter"...... 19070-35190. ..... next just below 101311-5380 .



"Igniter Only" ..... 89620-12970 <~this number is very faded and hard to read. This may be wrong.


I would say all Igniters would have both Labels on them. So the top two sets of numbers should work (coil w/igniter.




.


Step into the world of Salvage Yard web surfing, I have found a few hard to find parts here http://www.car-part.com/ Good luck

[toyota_jon]

I have quite a few parts for 1st gen runners, and i am probably going to be looking to start cleaning out the barn here shortly. pm me with any specific requests.

first thing i know i am going to be selling is a 22-RE motor for sale with an almost new enginebuilder head and 268 cam, less than 2k miles. It is bolted together with the ARP stud kit. The bottom end is OK. compression is all within 5psi, could probably use new rings in the future. $500 located in colorado.

[irish_11]

I need a new ignition control module for a 22re. I'm having a hard time finding a good deal on one. The best I've found is $220 used, and I can buy a new one for $250. I'm getting a 4th cylinder mis-fire and my shop told me that was the likely culprit. I just replaced the coil, spark plugs, and wires. The Ignition control is the only thing left.

[Asha'man]

I have quite a few parts for 1st gen runners, and i am probably going to be looking to start cleaning out the barn here shortly. pm me with any specific requests.

first thing i know i am going to be selling is a 22-RE motor for sale with an almost new enginebuilder head and 268 cam, less than 2k miles. It is bolted together with the ARP stud kit. The bottom end is OK. compression is all within 5psi, could probably use new rings in the future. $500 located in colorado.

Is it still in a rig, as in, could still be run/driven? Where in CO?

[Scenic WonderRunner]

Have any of you ever upgraded your radiator to an all aluminum radiator?

My piece of junk csf is now leaking once again! This will now be my 4th replacement on the lifetime warranty. But now they tell me that they only have 1 year warranty radiators! But I bought a lifetime warranty radiator back in 2004! They must have used very accurate scientific data to ensure that these radiators will spring a leak every 12 months +1 day!

Anyway. I'm going to go get the new free replacement. It's going to sit in a box! And I may just sell it! A brand new radiator with 1 year warranty (receipt included!), coming to an ExPo parts for sale thread near you! UG!

So I'm thinking of upgrading to an all aluminum.

I found this link. (http://www.autopartswarehouse.com/sku/Toyota/4Runner/Silla/Radiator/1988/SR5/6_Cyl_3-dot-0L/SILLA7286AA.html?tlc=Engine+%26+Drivetrain)

And main radiator page..... (http://www.autopartswarehouse.com/search/?N=0&Nr=AND(wpn_tl_name:Engine+%26+Drivetrain,wpn_cat_n ame:Radiators+%26+Cooling+Systems,wpn_scat_name:Ra diators))

Has anyone used this radiator in the 3.0V6 truck.

Part Number: SILLA7286AAManufacturer Number: 7286AA

Looks like it's 1" inch shorter than stock.

After spending 30 min. in the online chat box....I just gave up!

If it won't fit. Does anyone have a good link for an all aluminum radiator? No Plastic.


http://www.autopartswarehouse.com/images/product_images/images/silla/7286AA.jpg



.

[Scenic WonderRunner]

I just ordered a new CAT for my truck.

I've used this site before. They have good prices and service.

www.performancepeddler.com.... (http://www.performancepeddler.com/)

Use the Login code "afterhours4U" .....for the best price/Wholesale Login




.