Lovell's Springs for Gen 3 Montero?

[ahmetclayton]

Has anyone used the Lovell's Springs for their lift? My cousin in Australia told me they give 3" lift vs. the 2" the OME setup provides on the Gen 3 Montero! I looked at a couple of pictures of Gen 3 Pajero's in Australia and they really do look a little higher then the vehicles with OME springs. I'm trying to gain more info to see If I can get a set shipped to the U.S!!!

[eleblanc]

Has anyone used the Lovell's Springs for their lift? My cousin in Australia told me they give 3" lift vs. the 2" the OME setup provides on the Gen 3 Montero! I looked at a couple of pictures of Gen 3 Pajero's in Australia and they really do look a little higher then the vehicles with OME springs. I'm trying to gain more info to see If I can get a set shipped to the U.S!!!

I have a Gen 3 with OME, don't forget higher the lift wider the wheel spacer you'll need....:)

[Monstero]

No queston lovells are great springs to run...they probably look taller because they are a lot more restricted on their stock tire sizes down there then we are up here. That will allow more space between tire and fender giving the appearance of more lift.

[ahmetclayton]

Yeah that might be true. The people I talked to were running 265/75/r16's which I am planning to run soon. I'm just trying to gain some more info to see if it is worth importing a set or just going with the OME setup. The Lovells cost about $300 more with shipping and handling included. But if it really does give a 3" lift like some say it does, it might be worth it.

[Kollar Racing Products]

Hello All,
I am Andy Kollar of Kollar Racing Products. I am the North American Distributor of LOVELLS Products. LOVELLS springs are manufactured in Australia with Onesteel(Premium Australian Steel) and are not manufactured in Asia as many aftermarket products are now manufactured. Lovells Springs have a FIVE year unlimited milage warranty. Springs and suspension kits are availble from stock to lifted for virtually every Mitsubishi 4wd imaginable.

[off-roader]

I have a Gen 3 with OME, don't forget higher the lift wider the wheel spacer you'll need....:)

Why?

[eleblanc]

sorry that is not really true, you'll fit max 32 or 33, cannot remember, even 33" might rubber in front.