PDA

View Full Version : 99 4Runner suspension question



downbylaw
04-30-2010, 03:29 PM
I have 109k miles on my 99 4Runner. Shocks and coils are original equipment; never changed out. They feel soft to me and there is some sag in rear. I don't need any more lift but I would like to stiffen up the ride. I'm on pavement 80% of the time. The rest of the time on forest service/logging roads and a lot of corduroy usually w/ fairly light loads. Any suggestions for kits? Thanks.

RusM
04-30-2010, 03:37 PM
www.cruiseroutfitters.com
Old Man Emu

SilverBullet
04-30-2010, 03:54 PM
OME if you get the right parts (I did not) or go with Sonoran Steel. Steve has some mild and some wild kits.

Loober
04-30-2010, 04:29 PM
Yea, steve at sonoran steel has a "best stock suspension kit" its only 600 for everything

Applejack
04-30-2010, 06:33 PM
Lots of options here, Toytec has a lot of pickin's too. But my .02 is OME Because '99 were the tallest of the 3rd gens you won't notice too much lift if you select your springs right, but you will notice handling improvements across the board.

digitalferg
05-01-2010, 03:37 AM
www.cruiseroutfitters.com
Old Man Emu

x2