License plate mount

[Davids90toy]

We need to moun the license plate some where the new bumper we put on doesnt have a spot for it and covers the stock spot. Any sugestions all open..

Tailgate mount
Light Bolts: legal/illegal?
Cheep light frames?
other mounting and lighting sugestions?

Thanks

[Rockcrawler]

Any pictures of the vehicle/bumper we are discussing??? It might help us to offer some better suggestions.

Kyle

[detailbarn]

not sure of your needs but this may work ,

https://secure.aev-conversions.com/store/merchant.mvc?Screen=PROD&Product_Code=10404002AA

[Davids90toy]

i have some pictures and will post them soon and yes thats great thanks i couldnt find any that looked good

[justfred]

I usually just use a couple of bungees, especially for the front licence plate.

[MountainBiker]

This is a timely post, as I have the same need. I replaced my bumper with custom bumper/2" receiver hitch. I was looking for better departure angle, and the hitch. Since the new bumper is too short in height, I need to mount the plate on the liftgate, but haven't found a good product.

[Davids90toy]

performance parts has a frame i found with lights along the top that would work great. as of right now we have the license zip tied to the bumper with the stock light zip tied on top :) once i put on the frame and put on the tailgate ill post up some pictures so you can see.

[MountainBiker]

Do you have a part number for the Performance Products unit?

I found this one over at Summit:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=BSP%2D55220&N

[MountainBiker]

Do you have a part number for the Performance Products unit?

I found this one over at Summit:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=BSP%2D55220&N
I bought this unit from Summit. It is expensive, but it looks good, and should do the job. I should have it mounted up this weekend.

[DaveInDenver]

Too late I guess, but another option is the rear license plate frame from a '84-'89 4Runner. The Toyota number is 81270-89120. I don't have an actual picture of it besides the diagram, but I've seen it used before on rear bumpers. It's got a light and says 'Toyota' across the top (nice touch I think). It's got a lock cylinder, so maybe there's way to rig that up for something else. New it's at least $120, but you maybe could find one in a junk yard.

[flyingwil]

What about a spring loaded flip up kind like off an older Camaro?

[97kurt]

Another option is the holder from a 2nd gen 4runner that had the factory tire carrier. I got the holder and light new for about $80.

http://www.kurtandnichole.com/gallery2/d/7569-2/IMG_3412.JPG

[Davids90toy]

Here is the one i bought the one from porformance parts was sold out and took a bout a month haha for them to saywe have to order it and itwill be a while heres thelink to the one we got

http://www.stylinconcepts.com/part.a.../categoryid/25