PDA

View Full Version : camp shower heat exchanger



LAW
04-28-2007, 01:54 AM
any idea where i can source a heat exchanger for one of these camp showers?
i can find em everywhere as a kit, but i feel that i can piece one together a whole lot cheaper than these kits sell for.

PhulesAU
04-28-2007, 01:58 AM
Are you looking to go water to water? Useing engine heat? or Direct heating like the stove top units?

LAW
04-28-2007, 02:06 AM
Are you looking to go water to water? Useing engine heat? or Direct heating like the stove top units?
water to water exchanger

PhulesAU
04-28-2007, 02:23 AM
If you can do a bit of Fabbing. You might try a 6-8" steel pipe, Tap one "side" of it to allow you to place a small tranny cooler inside with the fittings coming out the 2 holes. seal and tighten fittings. I'd sweet talk someone into threading the end and buy 2 caps. tap each for a fitting which will be for your HOT water in / out from heat source. cold water in thru the T-Cooler and out to the shower head!!! You might want to valve the heat input line, for some temp. regulation.

pwc
04-28-2007, 02:27 AM
Something like this is a bit spendier, but ready out of the box
http://frybrid.com/parts.htm#heat
http://frybrid.com/images/hedtrh.jpg

they have another model and I'm sure you can find them at RV stores.

Erick Lihme
04-28-2007, 02:34 PM
http://www.cruiseroutfitters.com/ carries the same unit as does Sierria Expeditions, which also carries a long line of nifty gear.

el




any idea where i can source a heat exchanger for one of these camp showers?
i can find em everywhere as a kit, but i feel that i can piece one together a whole lot cheaper than these kits sell for.

dieselcruiserhead
04-28-2007, 07:42 PM
X2 on CruiserOutfitters, they have neat Helton Aussie exchangers, very powerful, just as good if not better than the frybrid hotplates, which would work great too...