View Full Version : Removing third row seats from a Disco II
Colorado David
08-12-2011, 02:51 AM
I searched, but didn't find a topic easily. I did a general internet search and found a brief discussion on an Australian Land Rover forum. It looks pretty straight forward. Has anyone done this and have any particular insight? I don't think anyone is going to sit back there in mine and they take up a lot of cargo room. Thanks.
bmxer06pa
08-12-2011, 03:19 AM
I took mine out. If I remember it is two bolts and two nuts that I think are the same size. I had to fend off some old French fries in the corner, but other than that it was a 15 min job.
DNTL740
08-12-2011, 03:58 AM
2 bolts on top, and 2 nuts on the bottom.
I found its easier to take the 2 bolts out on top first, and then the 2 nuts on the bottom.
Not too hard.:ylsmoke:
AxeAngel
08-12-2011, 11:58 AM
2 bolts on top, and 2 nuts on the bottom.
I found its easier to take the 2 bolts out on top first, and then the 2 nuts on the bottom.
Not too hard.:ylsmoke:
Correct. It's not really rocket science...
-Sam
Powered by vBulletin® Version 4.1.11 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.