PDA

View Full Version : ARB fridge mounting



enzo
11-10-2011, 01:05 PM
How are you guys with DC tacomas mounting your fridges inside your trucks? I've got a 50qt ARB and would like to mount it in back of the cab some how. Pics would be greatly appreciated.

Box Rocket
11-10-2011, 04:54 PM
I have a simple platform I built to fit in the back seat area of my DC. Obviously the seats are removed when I use the platform and the platform is secured using factory seat mounting holes. I'm using some track system tie downs to secure the fridge. I'll build a slide for it one day, but this works well. Lots of room on the other side for more gear.

http://i90.photobucket.com/albums/k254/boxrocket/_MG_5250.jpg

enzo
11-10-2011, 05:10 PM
Looks good, thanks.

Utah KJ
11-10-2011, 05:19 PM
Just seat belt it in back there... that would be expo ghetto fabulous.

enzo
11-10-2011, 11:05 PM
Just seat belt it in back there... that would be expo ghetto fabulous.

Yea that would be a little ghetto. lol

Tim A
04-09-2012, 10:34 PM
Enzo, what did you end up doing for a fridge mount? Thanks.

zidaro
04-10-2012, 04:05 AM
I have a Tundra, but what i did was pull the small side of the rear seat, place sport climbing bolt hangers at each seat bolt location, and use the hangers as tiedown hooks to secure the fridge and tool bags so they have no way of flying around if the sh** hits the fan.

enzo
04-11-2012, 03:11 PM
Enzo, what did you end up doing for a fridge mount? Thanks.

I folded down the back seat and bolted the slide to the plastic seat back. I've driven off road several times and it's held up well. If you wouldn't mind sending me a PM with your email, I can send you some pics.
http://img220.imageshack.us/img220/2569/img1323hr.jpg
By blackfeild (http://profile.imageshack.us/user/blackfeild) at 2012-05-26

Tim A
04-11-2012, 05:06 PM
Done thanks man