the last hurdle

[Fernweh]

http://www.youtube.com/watch?v=eB9pcnFv35Y

[aircruiser]

Appropriately named! The trail chain saw is becoming your trademark.

[traveller09]

I love the big belch about 2 min in.

[Fernweh]

Yeah, must have been the cold Pacifico's.......

This post was just a test to see if able to post those flash & burb videos

[GroupSe7en]

Nice hat!

[Canada G]

Yeah, must have been the cold Pacifico's.......

This post was just a test to see if able to post those flash & burb videos

how did you do it?

[Fernweh]

It is easy, if I can do it - anybody can. Just read the forum instructions about posting a video.


After 4 days driving, we made it from the Pacific Ocean straight across the Baja to the Sea of Cortez. The grueling last 3 days were spend on only 5 miles of rebuilding a severely washed out road....

Now here's our victory run



http://www.youtube.com/watch?v=1t0Xlj55i-c

[mk216v]

Karl sitting back with camera and cold Pacifico while Harald and Alan throw rocks around.
And why isn't Harald spotting like he should be?
;)

[otiswesty]

Ya, I thinks that's where I broke the exhaust hangar on the right side.

If I had my lift on yet I probably would have cleared that rock on the upper slope too, nice of Harald and Alan to pile the extra rocks on and a little spotting from Harald and Karl
A bit colder here now, but I notice the the stance is a little taller with the spring spacers and new shocks
Good times...
:sombrero:

[mk216v]

Eric, which shocks did you go with and how do you like them? Do you have Karl's 30mm spring spacers?

[otiswesty]

Yes, I got a set of the 30 mm spacers from G-wagenaccessories.com, hand delivered in Philomath

The shocks are Bilstein for 463, my old fronts were blown and the rears had some damage as well, both original to the truck.
Install was done at Motorsports in SE Portland

[mk216v]

Yes, I got a set of the 30 mm spacers from G-wagenaccessories.com, hand delivered in Philomath

The shocks are Bilstein for 463, my old fronts were blown and the rears had some damage as well, both original to the truck.
Install was done at Motorsports in SE Portland

< wrench > Tony!

--waiting on my Koni Raid HT's and red3/brown2's via Guido--

[otiswesty]

Here's Fernweh going down the last bit...
:costumed-smiley-007

[otiswesty]

< wrench > Tony!

--waiting on my Koni Raid HT's and red3/brown2's via Guido--

It will be interesting to see how the different spring rate affects ride quality
E

[otiswesty]

Went down in the motorhome this year...