Printable View
Would be nice to get a popup version of this, would be perfect.Quote:
Originally Posted by Overland Hadley
http://www.expeditionportal.com/foru...ad.php?t=28099
http://farm3.static.flickr.com/2446/...c56200bdc2.jpg
or this would be even better. I might have to build my own.
http://www.4x4storagecomponents.com..../Utes/ute1.JPG
Will you be able to close or remove your tailgate while the camper is attached? In the open position, you can not access the mechanism to raise and lower the spare tire. You can probably make something with a swivel in it to get around this, but should be aware of it before you find out the hard way.
Just don't go camping where there are bugs... Mosquito's would kill you in that thing.
That is why they make screens.:ylsmoke:Quote:
Originally Posted by joelweb
Where is the spare winch crank if the camper blocks it, mine is in the bumper. Two of the three sections of the handle work it when the tailgate it up but if the gate is down you add the third to get the handle out past the tailgate.Quote:
Originally Posted by tnt
Fair enough, but given the mounting placement of the gas struts, it doesn't look easy to mount screens over the big side wing openings. They would most likely have to be on the little sliding windows. I'm sure you could put something up, but that thing wouldn't be as practical as it looks for camping in my country. Head to a dryer place and I'm sure it would be great...Quote:
Originally Posted by RR1
Quote:
Originally Posted by tnt
Good point. Don't know about the new body-style Tacomas like Overland Hadley's, but I wouldn't be able to access the hole to thread the crank through to drop the spare tire, if I left my tailgate on and in the 'open position'...
I couldn't remove the tailgate without raising the rear of the camper several inches. It's been a long time since I've had my tailgate on, but IIRC, I think I need about a 45* angle to install or remove the tailgate. Not much of an issue I guess if you have the jack stands attached to the camper full-time, but if one doesn't travel with their jackstands attached (like me), this could be a small problem if you have a flat and need your spare tire.
I do like the idea of leaving the tailgate on & down (can't close mine with the camper on) as a platform to carry water and/or gas cans outside of the camper, rather than hanging them off the rear wall or stored up on the roof. I've struggled for years with a solution for carrying an extra fuel can with a FWC. I've taken to storing it inside the camper but I don't really like doing it. That said, I've yet to have an issue or any leaks with the Scepter fuel can stored inside while bouncing around on rough trails in places like Death Valley and the Maze in Utah.
:coffee:
.
The tailgate can be closed with the Finch and a Gen 2 Tacoma. :ylsmoke:
(The tailgate will be closed while traveling.)
I like the big doors to get gear in and out, most likely only screen the back opening. Wouldn't sleep with the side doors open anyway.Quote:
Originally Posted by joelweb
I have a photo of the tailgate closed at home, will post it up when I get back. If I remember correctly there is very little clearance, less than 1/4".Quote:
Originally Posted by Overland Hadley