That is just the 2.5 NA motor with the standard 2010 4-speed automatic transmission.
The steel wheels came from Tire Rack with the snow tires mounted on them but they can likely be sourced sans...
Type: Posts; User: 96discoXD
That is just the 2.5 NA motor with the standard 2010 4-speed automatic transmission.
The steel wheels came from Tire Rack with the snow tires mounted on them but they can likely be sourced sans...
This was my setup for deer camp last fall. The camper is a custom camper I built, it weighs 1360 with the propane tanks and rv battery on board. I stowed my gear in the back of the subaru so there...
No kidding, I was looking at doing a 1999-2004 D60/Sterling 10.5 swap but I figured just swapping in the correct Dana 60 was easier.
Why the 05, better ride quality with the coils or better...
Lots of good info guys thanks for the input!
dd76522, do you have any pics of your truck on the 37's? I'm thinking of trimming and putting 35's on this truck with no lift or maybe a very slight...
The cummins is tempting but they seem to go for stupid money right now.
Rot Box, you bring up a lot of good points. I was told I would need to swap wiring harnesses primarily because the dash in...
My dad has a 1987 Ford F250 4x4 diesel that he no longer uses since he now has three 7.3 powerstroke diesel superduty pickups
Long story short I'm buying the '87 from him on the cheap. It has...
Just updating mine since my rides seem to change every so often.
Current rides include
Surly Karate Monkey set up as a 1x9 with SRAM X9/X0 drivetrain and Velocity P35 wheelset
Surly Long Haul...
These little subaru's are definitely capable. I drove my wife's 2010 Forester down a rough forest trail following my brother-in-laws H3 and was able to keep up and take his line with the exception...
Nice bikes and thanks for your service!:bowdown:
Love the bike, love the patina!
I would definitely stay away from any full suspension bike until you can afford to buy a really good one.
The biggest thing is to buy the best frame you can in your price range, everything else...
Gorgeous bike, love the lines of the top tube flowing in a graceful arc into the the rear chainstays.
Get an 870 combo and then you can use it for upland bird/small game hunting with the 26 or 28" barrel and deer or large game with a rifled barrel. Just my .02 if you can get a barrel with a...
I will concede that there is merit to most of what you're saying, I probably didn't word my thoughts very well. Specific to rear cassettes I was trying to state that in my mind there is a point of...
I can't imagine how they can possibly fit 12 speeds in there, at some point in my mind it becomes counterproductive because you can't help but make the cassette heavier by adding gears. The other...
Good point on the cost of building versus buying. I am building mine only because I will have the freedom to tailor it to my specific desire and intended usage, and because I prefer the resiliency...
I've not seen anything specific for using bags like that without panniers. I think it could be done if you know someone that can TIG aluminum tubing/rod so you can keep the weight down.
I've...
I'm building a hybrid touring bike myself utilizing an old Trek 820 steel frame, the first MTB I owned. I could have bought a decent touring bike for what I'll end up putting into this one but this...
Well, I'm just getting back into the fray after a few years away from cycling. I'm signed up for the Iceman Cometh MTB race in November in northern MI so I need to start training now!
My current...
Lots of stuff still available, open to reasonable offers. Thanks!
It's a pair (two lights) along with brackets to mount on the front of a JK (purchased at quadratec) and a daystar switch panel and rocker switch for a JK.
Scepter MFC's have been sold. Thanks!
I have a few parts that I have removed from my 2010 JK Wrangler Unlimited since I'm selling it. Most of these parts have little or no usage as detailed here:
1- Poison Spyder Evap Canister Skid...
The jeep has been sold.
That's a true statement for sure! It's been difficult for companies to find ways to reduce expenses fast enough to keep up with declining revenues. The good news if there is any is that the...