I just stay out of the water....
Type: Posts; User: verdesardog
I just stay out of the water....
I have no balance on my HD cards! I have three of four of them but never use them. They keep giving me dollars off to get new ones that I never use....
here's a link to my install: http://forum.powerwagonregistry.org/viewtopic.php?f=11&t=886&p=11587&hilit=frame#p11587
Yes the box has done it's job perfectly, I have about a ton of dried mud under the truck right now but the compressor is clean and working fine!
hear are some pics of how I installed my oba: http://forum.powerwagonregistry.org/viewtopic.php?f=11&t=886&p=11587#p11587
Mine has a Stainless steel box around about 75% of it to keep splashes off of it and the intake filter is inside the engine compartment I will post pics in a couple of days I'll be out camping for a...
I just ordered one from preppers with free shipping!
Good job, I like it that you have had an idea and have followed through with it. Good luck with your venture!
Mounted under the driver side frame rail. Quick connect at the rear of the bed inside the camper shell for 200 psi and a regulator in the engine compartment to drop the pressure to 125 for the pac...
See ya then. Class starts at 0900 sharp!
The class will start at 0900 Saturday morning 02/22.
107 airport Rd, Cottonwood AZ
Camping allowed at the site.
RSVP to Michael at:
That looks like a standard Power Wagon set up. If you have a hemi you can do it but there's not enough room with a CTD. And it will be WAY more than $1000!
I take that back, it doesn't look like...
How many critters are you planning on hitting? Even when I lived just wet of the continental devide on Colorado where there were lots of road kill on the road I never hit anything. Bumpers alone are...
I would use anderson plugs.... and have a short set with anderson plugs and clip to plug into your line for jump starting other vehicles.
I have anderson plugs for my jump starting setup with 15'...
Here's what I put on my 06 CTD, it was less than $1,000.00
I just put cheap chinese headlights on my truck, they are much better than the sun damaged ones I took off. Probably as good as an OEM set. $130.000 for the pair:
Still a work in progress but useable now:
I got the ceiling insulated this morning. Went to Home depot to buy the insulation and was offered $50.00 off if I got a HD credit card! That covered the complete cost of the insulation. Three 4x8'...
You can't really tell by a photo how bright any light is, a candle can be made to seem bright in the dark of night with a camera.....and notice how fast the light drops off so it would probably be...
The local walmart has some decent looking light bars for $25-35 depending if you want one row or two. Made for vehicle driving lights but would make for nice side of the trailer task lighting ....I...
many manufatureres will say you need a seperate regulator for their appliance.......
How much would this cost?
The floor iscomposed of four components:
1. 2x decking (original).
2. Solid foam insulation with aluminum radiant sheild.
3. OSB screwed to the decking through the insulation.
4. Bamboo stapled...
I've seen those but I want this to be more civilized LOL
I do have an old Sears pot belly stove in my shop that I thought about using....
I got the car decking floor covered with insulation,osb and bamboo! It's weather tight and useable now.