Search:

I don't actually have a JK, but I have been pricing them and looking at countless. I myself am also looking into upgrading to a new Wrangler. Well to answer this question for you, it's actually...

He probably wants to keep the center of gravity low especially with something like a water tank which can get up to 125lbs for a 15 gallon tank (if I did my math correctly). I know if I had the space...

Hey what going on. Do you have the underseat style security drawer or the rear cargo drawer? If you have the rear cargo drawer then you should be able to put all your tools in rolls.

Here is a...

I'd like to chime in just to ask you a couple of questions. If he doesn't want to regear then he probably has 3.07 gears. If he wants to go to 33's then he is going to lose 5th gear & the ability to...

I think I'm in heaven.....I've always told my girlfriend that I wanted jumpseats in a Jeep!

"The mounting system is the single most important part of a bull bar design. ARB's mounting systems are specifically engineered for each vehicle, and are designed to spread impact and winching loads...

What gear ratio did you end up with? I'm trying to decide between 4.56 and 4.88. I know that the optimum range for the 4.0L is 2500 RPM, but I can't grasp that concept. Then again I am use to 3.07's...

As promised here are some shots of the flex of non broken in OME TJ/LJ Coils Springs, etc... Not to shabby. To give you a little bit of reference the bottom of the driver side front tire was 31.25"...

Yeah I know. I will be flexing my truck out tomorrow and will definitely be snapping some pics. Granted it'll be with a forklift, but flex is flex. :)

Hey sorry I missed your post. Well there were quite a few reasons why I went with the Old Man Emu setup. For one and probably the biggest reason was because of there different rate springs that they...

Hey where did you bring your Jeep to get everything done? ie gears etc. Now that I am driving this thing it is a MAJOR dog and I'm already looking at gear/axle replacements.

I got the LJ springs to compensate for the additional weight that I have on my Jeep, ie. hardtop, rack, soon HD rear bumper, lots of tools, etc. They give a stiffer ride, but also give me less "sag"...

Basically when you do the body lift and the motor mount lift it puts the motor back to a "stock" location in reference to the body so no adjustments had to be made to the radiator or fan shrouds....

Yeah I did a JKS Motor Mount Lift, and I have no vibrations what so ever which is great! The ride and handling are pretty good. The LJ springs are definitely stiff, but that's what I wanted in the...

Hey what's up guys. After A LOT of research I finally lifted my '97 TJ yesterday! I weighed out all of my options and thought about all of my future plans and this seemed like the most reasonable and...

I too have the LG Voayager. I started out with the whole package including the VZ Navigator. I tried it just to see how it was and honestly you would be better off getting a dedicated GPS. That way...

Congrats and Good Luck with the project!

I'm pretty sure that the Euro Light and Driving Beam are the same. I believe don't quote me on this, but I'm pretty sure that the only difference is that the Euro Beam is SAE Certified.

I would mount the Hella 4000 floods on the outside of the rack pointed outwards a bit, and the spotties on the inside. This would allow you good side coverage with the floods and also the spotties...

Thanks everyone that replied! It looks like I might just eventually go with the bolt-on shackle or if I dare say dixon-bate idea. I think it would give me a little reassurance in that area. Thanks...

Alright this might sound crazy, but have you tuned your antenna to your cb? Having a mismatched antenna can cause all sorts of crazy problems. The multimeter idea is a good one to determine if you...

Here is a picture of the bumper for those who are not familiar. I'd like to put the lights roughly where the ARB sticker is on the left hand side and the same location on the right.

**Note this...

Hey what's going on folks. I have a quick question about the ARB Front Bull Bar/Winch Bumper for a Jeep Wrangler TJ. I know that it is very well made and every little aspect of it is engineered to...

I to have a Garvin Wilderness Rack for my '97 TJ. It is the same basic construction. I actually had the same question last year and finally came up with a simple solution at least for me.

I just...

Could these be them?

http://www.quadratec.com/products/14260_309.htm

On the Wet Okole topic. There have been complaints that they start to smell after a while, but that is all through the grape...