Search:

If you can manage with 2 x 6v batteries in series then they are preferable to 2 x 12v batteries in parallel. No 2 batteries are exactly the same and when everthing is turned off the 12v batteries...

IcedV,
I have a 2007 NPS, one of the last before the latest straight chassis and DPF models.

I am interested in what you had to do to fit the parabolics from the F series truck. Did it require...

I have a 2007 NPS 300 and am building up a camper myself (slowly).

I researched the tyre and rim issue early on and was very frustrated with what was available and legal here.

My vehicle is...

Craig,
Not a tyre expert but over the years I have gained quite a few insights.

I have had a lot of vehicles over the years and particularly early on they were parked ourside and I could see the...

Leisha,
I am currently at the beginning of the same project based on a 2007 NPS. My time has to be shared with other demands and hence progress is slow.

My design started out with roof height as...

Rather than go for a really big heavy winch a medium sized one (~12000) with a snatch block (pulley) and an extra length of rope or extension strap is a good way to go. Yes it slows the retrieve...

Bee,
As a part of the workup for my design I read as much as I could about mountings and found it quite confusing with the large variation of approaches. Eventually I came to the following...

Bee,
I am not planning any aerobatics just trying to work out where between two extremes I should load the mounts. Anyway I have made the decision and ordered the springs. I am having 5 mounts each...

There is a separate thread that has been started regarding spring mounts that would benefit with comments by the learned members here.
...

Bee,
I am planning to use the same method to attach a sub-frame to my Isuzu NPS 300. The subframe will hold storage bozes and tanks and also provide mounting rails for a custom built slide on that...

I am currently wrestling with the design of a system to mount a slide on onto the back of my Isuzu NPS 300. I will build a subframe of some sort but have changed my mind several times now after...

Just found this buildup and am very impressed with the care taken. Your work looks to be of very high standard.

Interested in the tie downs you used. They look like they are very strong and have...