'90 f150 build

hobobrando

New member
I Like that 4bt, something to keep in mind for when my tired 5.0 takes its final breath which I fear will be sooner then later. Was it a pretty straight forward swap fitment wise? Availability of parts?
 

52wrench

New member
I Like that 4bt, something to keep in mind for when my tired 5.0 takes its final breath which I fear will be sooner then later. Was it a pretty straight forward swap fitment wise? Availability of parts?

I used the original hydraulic isolators that came with the engine then I modified the original engine brackets and had to make new frame brackets. Parts for the engine are not a problem, I got a lot of my stuff off Ebay. My engine came with a TH400 set up so I had to get the Ford trans adapter and flywheel. I used the original trans crossmember in the back. These old Fords are almost made to fit the 4BT. All the other stuff I did to the truck took most of the time.
 

Attachments

  • 100_1383.jpg
    100_1383.jpg
    502.3 KB · Views: 3
  • 100_1385.jpg
    100_1385.jpg
    484.8 KB · Views: 2

Forum statistics

Threads
185,530
Messages
2,875,579
Members
224,922
Latest member
Randy Towles
Top