Page 1 of 3 123 LastLast

Thread: Official OZTENT review

Hybrid View

  1. #1
    Join Date
    Sep 2005
    Location
    Tampa,Florida
    Posts
    2,008

    Default Official OZTENT review



    Well everyone we have talked about it off and on for some time. I have finally got around to getting some picks of the Oztent system with a few of the options they provide for it. Mike and I each got one a few months ago but we have been slammed and had very little time to use them. Today I went up to Croom Wildlife Management area and set up the tent to get picks for every one.

    First I want to Thanks Oztent for making it really easy on us to get 2 of the RV-4 units shipped up From Australia. They handled everything and it only took about 14 days once they left OZTENT to get to our door. Four of those days were sitting at customs waiting for the U.S. shipper to get clearance. Oztent is working on getting a real U.S. distributor signed up so hopefully first quarter 2008 these units will be well stocked in the U.S. and readily available. There goal is a full U.S. dealer network in the not to distant future.

    Two large boxes showed up well packaged but as usual beat up pretty bad. Both had actually been torn here and there but luckily nothing fell out of the boxes and everything showed up as planned.




    I loaded the Oztent on top of my suburban since I had the 3rd row seat in the back and it would not fit with out removing the seat. For most rigs the roof is where it will ride except for pickups where it will ride in the bed.

    This particular RV-4 model weighed 48lbs on digital shipping scale at my office. So although not the light compact stowable tent you are used to it is still light enough to through on the roof rack with out killing yourself or adding a ridiculous amount of weight up top on the rig. Other units weight less, such as the RV-3 about 10lbs lighter, and they go down from there

    Once off the roof it actually took me 45 seconds to get the tent up and another 30 seconds to put out the 6 basic stakes to secure it. This was by myself and only the second time I deployed it. For heavy weather there are a ton of other stakeout options which you will see later but to set it up in the late of night or in a rain the basic shelter is up in no time. They are very comparable to a roof top tent in set up time.

    There are 5 steps to deploying the tent.
    1: Take it out of storage bag.

    2: fold side "a" out.

    3: fold side "B" out

    4: Raise the tent and "lock" the internal frame rails

    5: stake out the corners and rear wall. 6 staked total



    For a quick deployment in a storm or late at night to get to bed fast this is as far as I would go with the tent.

  2. #2
    Nullifier, thanks for the great review and excellent pictures, do yo have any with a person in the tent or standing next to it for a size reference. thanks

  3. #3
    Join Date
    Sep 2005
    Location
    Tampa,Florida
    Posts
    2,008
    Once the tent is up you will notice all the details that went into designing it.

    Fist there are 2 pockets sewn into the rear wall of the tent above the rear window and one on each side near the front wall.







    These contain stake out lines that are built into the tent so there is no time wasted trying to locate the lost ropes to secure the tent in foul weather. The lines are a bright orange color as to help you not trip over them once deployed.



    Above the front door are 2 vent windows to let heat escape in warm weather. These have flaps that drop and Velcro over the no seeum mesh for cold weather.




    Each side has a decent size window that has flap stays at the bottom to keep the window flap from laying on the bottom of the tent.




    The large panoramic rear window has a few great features. The large flap that rolls down for foul weather can also be staked out for added strength to the rear wall once zipped up. Or be left unzipped and staked out to provide shade and ventilation. It has the stake out lines stitched into the flap.




    Moving inside you notice right away a very thick and durable bathtub style foor and seem sealing through out the tent factory. The internal frame is actually really well put together and secured to the sides of the tent via Velcro fastners. Its aluminum construction will provide years of worry free service. There is even a zippered port large enough to run a zodi tent heater into or power lines from a generator or from the truck. Most importantly is the fact that you can stand up and not hit your head on the tent. Only the tallest of people will have to bend over a bit as they approach the back of the tent.


  4. #4
    Join Date
    Sep 2005
    Location
    Tampa,Florida
    Posts
    2,008
    Now if I was going to have a camp set up for a full day or longer I would deploy the built in front awning. Simply undo the 3 awning stays and let the awning drop.



    Dont forget to stake out the top of the tent.



    Then get out the 2 Telscoping twist lock poles and stake them out. You now have a nice porch to sit outside and enjoy the view from your remote camp.



  5. #5
    Join Date
    Sep 2005
    Location
    Tampa,Florida
    Posts
    2,008
    Just when you think you have your OZTENT set up, you are not done yet my friends. Oztent has released several well designed accessories for the tents. We have aquired a few of them to show you how expandable the tents really are. Often times on extended trips you will Base camp and then set out for day adventures like hiking, fishing, photography hunting, paddling, exploring trails in the ol’ 4wd or maybe your base camping as a pit crew for a Baja race team. No matter why you do it, nothing is better then coming back to a camp that is ready for you to go to sleep in comfort, cook a meal under a shelter in bad weather, load pics on the laptop or crack an adult beverage and hang with your closest friends in the wilderness.

    A preview



    Oztent has designed a fully expandable porch system. With options such as side panels, deluxe side panels (featured), front panel (featured), ground sheet, rain fly, R.V. connector, and awning connector. These options make an already unqie tent a one of a kind camping condo.

    We will fisrt add to our RV-4 the deluxe peaked side panels. We opted for the deluxe version since it features a peaked roof which will help significantly with rain run off and fight pooling on the awning, since we live in an area where rain is a constant. The install process is realtivelty quick and painless.



    First zip the side panels to the top section of the awning and then to the actual tent.



    All of the zippers are then covered with built in storm flaps that Velcro into place.

    At the front of the porch you can now use the Velcro ties and attach the side panels to the front poles to secure them.



    Next get out the 2 telescoping poles from the kit and install them remembering the top cross support. At this time you are ready to stake out the added poles for extra stability.




    I did not stake them out today and would say that the stakes are only needed in heavy weather. There are even extra stake out points sewn into the side panels to really secure it in very heavy winds.



    The side doors feature no see-um mesh for ventilation as well.




    As you can see we have a nice sitting area protected from wind and nicely shaded There is plenty of room for 4 chairs and 2 end tables in the front porch with out feeling cramped since the front porch measure 8’ wide by 7’ out.


  6. #6
    Join Date
    Sep 2005
    Location
    Tampa,Florida
    Posts
    2,008
    Lastly is the front panel.




    This will allow you to have a fully enclosed room to get away from mosquitoes, wind, or rain. Start by installing a cross bar at the front of the porch by placing it on top of the forward poles.



    Next zip the panel to the forward edge of the porch then down the corners. Finally use the Velcro ties to secure it to the front poles. You can adjust the poles height so the bottom flaps rest on the ground. In these pics I have the poles set a little to high so the flaps are not on the ground.

    Last edited by Nullifier; 12-24-2007 at 02:08 AM.

  7. #7
    Join Date
    Sep 2005
    Location
    Tampa,Florida
    Posts
    2,008
    These pics show you the full set up . I have placed a plastic 6’ table inside the screen room on one side for a kitchen table. I travel with a smaller lighter table I just wanted to show what could be used in this space. I still have 2 chairs and an end table on the other side of the screen room. Ther was still plenty of room to stand around and cook! If you are a hunter use this room to get your dogs, guns or ATV out of the rain.





    The front panels weather cover can be rolled up to allow ventilation and expose a no see-um door. Or with getting some extra twist lock poles you could deploy the front panels weather wall as another extended awning! That would give you a tent, a screened room and an outside sitting area!!! The tent and screen room give you an 8’x14’ foot print and with the screen rooms awning extended make it an 8’x20’ area! Oh and remember that with the optional connector you can hook to Oztents awning together. So by hooking 2 RV-4 models together with the side panels you would have an 8’X16’ screened room. Plenty of room for a group to hang out, with sleeping quarters on each end. Snorers in one tent, non snores in the other!

    These tents have a great range of sizes for 1 person to an even bigger size then the RV-4 for large groups. The RV-4 unit will sleep 5 no issue on sleeping pads. My wife and I roll in comfort so we are now using nice cots and we have plenty of room for our dogs crate and other essential items with out even thinking about it.

    All in all the most impressive Fast deploy ground tent I have ever seen. It is no wonder why these things are so popular down under. We are really looking forward to getting more tent time in these units in the next few months. We will continue to follow up on these units as they get more use and abuse.

  8. #8
    Join Date
    Jul 2006
    Location
    phoenix,az
    Posts
    409
    Awsome post-thanks!
    The first time I saw that set up on this forum a while back, I tried to call the guys at urbancrusiser, trying to buy their rv2 but no answer- too bad.
    I had the same idea for using it like Spressomon described, on my Eeze-awn which is mounted on myM416.
    its a great addition to a base camp if you plan to stay for a few days or have more people then the RTT can handle .I'm looking forward to a U.S dealer-I'll be ordering mine as soon as one is established.

  9. #9
    Join Date
    Sep 2005
    Location
    Tampa,Florida
    Posts
    2,008
    Quote Originally Posted by IZZYDUSIT
    I tried to call the guys at urbancrusiser, trying to buy their rv2 but no answer- too bad.
    Yea those guys are terrible. I tried to get ahold of them two years ago for about 6 months. All the mud members took up for him because he was going through a divorce. I felt for the guys but it is not an excuse you can use forever. Finally on a trip to ATL a year ago I drove over to the shop. Everyone was real nice but I was told that they pretty much just put in 1 order to get a few tents for themselves. They were not going to reorder. I wish they would take them off the web site since they are not carrying them anymore.

  10. #10
    Join Date
    Sep 2007
    Location
    Central Nowhere, NA
    Posts
    4,394
    Now, that is a tent review.

    Thanks Nullifier.
    Tacoma - For Extended Overland Travels
    2012 FWC - The TARDIS

    Trip Reports - Travels with Hadley


    -Nathanael
    Large Format Photography
    www.KuenzliPhotography.com

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •