I actually thought about it, but my CO2 take was low and I wasn't sure I'd be able to fully air up again. With all the weight and crazy mountain passes I didn't want to risk it.
Post Pic's of your Jeep
- Thread starter jwhutch
- Start date
I actually thought about it, but my CO2 take was low and I wasn't sure I'd be able to fully air up again. With all the weight and crazy mountain passes I didn't want to risk it.
Thanks for the compliments!
I'll have to admit I do get quite a few head turns when I go down the road. I finally got the my rear carrier on the trailer, been wanting to get the project done for several years. I can haul my kitchen box or a spare tire back there now.
Thanks for the compliments!
I'll have to admit I do get quite a few head turns when I go down the road. I finally got the my rear carrier on the trailer, been wanting to get the project done for several years. I can haul my kitchen box or a spare tire back there now.
That really looks great, I'm set on building a trailer next. Did you build yourself or purchase?
I bought the base trailer in 2011 and have been adding to it through the years. I've added rims/tires, inverter, fridge, awning, roof rack, RTT, swing-out carrier, scepter and rotopax cans. Still on my list is to bed-line the interior and tongue box.
This what it looked like new....
Last edited:
Mile High Guy
New member
chrisdev01
New member
2013 Jeep JK with Dinoot M-Series
2013 Jeep Wrangler Sport, 6 spd Manual
Teraflex D44 Front Axle
4.56 Gear Swap
Eaton eLockers, front and rear
Rubicon Express 2 1/2" Coil Spring Lift
Bilstein 5100 Shocks
Synergy HD Ball Joints
Synergy Flip Drag Link Kit
35" BFG KM2s
Shrockworks Narrow Front Bumper
Warn VR8000 Winch
Rigid Dually Sport LED Lights
KC 8" Trail Lights
Rancho Rear Bumper and Tire Carrier
Rock Hard Sport Cage
Hi-Lift Jack (mounted to hood)
Rotopax Water and Fuel Storage on Rebel Spare Tire Mount
Dinoot M-Series Trailer
CVT Mt. Rainier RTT
CVT Awning
2013 Jeep Wrangler Sport, 6 spd Manual
Teraflex D44 Front Axle
4.56 Gear Swap
Eaton eLockers, front and rear
Rubicon Express 2 1/2" Coil Spring Lift
Bilstein 5100 Shocks
Synergy HD Ball Joints
Synergy Flip Drag Link Kit
35" BFG KM2s
Shrockworks Narrow Front Bumper
Warn VR8000 Winch
Rigid Dually Sport LED Lights
KC 8" Trail Lights
Rancho Rear Bumper and Tire Carrier
Rock Hard Sport Cage
Hi-Lift Jack (mounted to hood)
Rotopax Water and Fuel Storage on Rebel Spare Tire Mount
Dinoot M-Series Trailer
CVT Mt. Rainier RTT
CVT Awning
FreemansXJ
New member
BCobe
Adventurer
Thats a good looking 2 door! Makes me want to get 35's again.
youngPreacher
Observer
The Commander has come a long way since last post
Sent from my HTCONE using Tapatalk
Sent from my HTCONE using Tapatalk
youngPreacher
Observer
Sent from my HTCONE using Tapatalk
BCobe
Adventurer
Really like your Commander but is there any information on that WJ?
youngPreacher
Observer
Just a kid who decided to join us. Instagram name is project_sultan
Sent from my HTCONE using Tapatalk
96inline6
Observer
thanks for the compliments. i paid 2600 for it stock.once you go through the maintenance they are pretty reliable
Yeticon
Just bought this jeep off a guy in Southern California. Have a 1946 CJ2A sitting in the garage but the family will not fit in it. So had to get a 4dr but need to get something going ASAP. Wanted a jeep with a bunch of upgrades already on it. Still have some work to get it family ready and got a bunch of stuff ordered today with Memorial day sales.
Upgrades already on vehicle:
-3" Teraflex lift
-37" KM2
-Fox Dual Reservoir Shocks
-Trust and Gusseted front Axle
-Chromemoly Stearing Linkage
-Poison Spyder bumpers, fender and running boards
-Teraflex Spare Tire Mount
-Poison Spyder Diff Covers
-G2 Front Axle Shafts
-Synergy Ball Joints
Parts I am working on getting this week:
-Picked up the 4.88 gears earlier this week.
-380C Viair 200psi Air Compressor showed up today.
-Ordered a River Raider Evap/Air Tank Skid Plate today with the 200psi Viair Tank.
-Ordered an Evo Protek Engine/Trans/Cross member skid plate today.
-Ordered a Synergy Engine Bay Compressor bracket today.
-Ordered all the extra air hardware today.
Planning to put in an ARB set of drawers and maybe a Gobi Roof Rack later this year but this week just looking forward to spending sometime under the vehicle in the next week.
Just bought this jeep off a guy in Southern California. Have a 1946 CJ2A sitting in the garage but the family will not fit in it. So had to get a 4dr but need to get something going ASAP. Wanted a jeep with a bunch of upgrades already on it. Still have some work to get it family ready and got a bunch of stuff ordered today with Memorial day sales.
Upgrades already on vehicle:
-3" Teraflex lift
-37" KM2
-Fox Dual Reservoir Shocks
-Trust and Gusseted front Axle
-Chromemoly Stearing Linkage
-Poison Spyder bumpers, fender and running boards
-Teraflex Spare Tire Mount
-Poison Spyder Diff Covers
-G2 Front Axle Shafts
-Synergy Ball Joints
Parts I am working on getting this week:
-Picked up the 4.88 gears earlier this week.
-380C Viair 200psi Air Compressor showed up today.
-Ordered a River Raider Evap/Air Tank Skid Plate today with the 200psi Viair Tank.
-Ordered an Evo Protek Engine/Trans/Cross member skid plate today.
-Ordered a Synergy Engine Bay Compressor bracket today.
-Ordered all the extra air hardware today.
Planning to put in an ARB set of drawers and maybe a Gobi Roof Rack later this year but this week just looking forward to spending sometime under the vehicle in the next week.