Wiring supplies: where do you order them?
- Thread starter SGTCap
- Start date
MotoDave
Explorer
www.waytekwire.com and www.delcity.com are my go-to sources. www.mouser.com has a larger selection and sometimes better prices, but more minimum quantity restrictions.
burnoil
Adventurer
Also check out http://www.mcmaster.com/
Buliwyf
Viking with a Hammer
I solder everything. I pull the screws from terminal strips and solder every wire down. Plastic aux light relays need a delicate touch and a high power iron for less dwell time.
-
Soldered connections rarely fail. If you do use connectors. Use dielectric grease on the wire before crimping. And also spray paint your aux relays and terminal strips down with Napa Battery and Ignition Sealant. Will help prevent corrosion.
-
Amain hobbies for flux, solder, and soldering stations. Weller 80w pencil for simple less sensitive wire connection jobs. 3m electrical tape and shrink. I do have a hitch with an aux backup light. I used a Deans ultra plug for that when I remove the hitch. LOLz.
-
Soldered connections rarely fail. If you do use connectors. Use dielectric grease on the wire before crimping. And also spray paint your aux relays and terminal strips down with Napa Battery and Ignition Sealant. Will help prevent corrosion.
-
Amain hobbies for flux, solder, and soldering stations. Weller 80w pencil for simple less sensitive wire connection jobs. 3m electrical tape and shrink. I do have a hitch with an aux backup light. I used a Deans ultra plug for that when I remove the hitch. LOLz.