burquedoka
Adventurer
After scoring a FlipPac for a full size pickup off Crags List locally here in Albuquerque for $300, I was determined to make it work on my Unimog. The length is good, but the width is much narrower than the Mog bed and the Mog bed has drop sides. So the decision was made to build a slide in unit that the camper was to be permanently joined to. I ended up building it out of 2x4 lumber and skinning it with aluminum to seal the weather out. So far the box is built, the aluminum skin is on and the shell is temporarily clamped on and the brainstorming begins how to do the rear end of the camper. I believe the flip up glass will go away, since it is ten feet of the ground when open, and a narrower fold down door will replace it that when folded down, it will have built in steps to get up into the camper. Next, the interior build out........
More pics to follow.
More pics to follow.