quickfarms
Adventurer
I am working on my camper and I need to repair several patches we did a couple of years ago and the foam to skin bond has failed.
The wall construction is .04 aluminum, on the inside and outside, bonded to a foam core.
I used 2" roof insulation, it has a thin fiberglass sheet bonded to each face.
I also used sealed pop rivets to connect the aluminum together.
What I need is a recommendation for bonding the foam to the aluminum and sealing the aluminum joint.
The wall construction is .04 aluminum, on the inside and outside, bonded to a foam core.
I used 2" roof insulation, it has a thin fiberglass sheet bonded to each face.
I also used sealed pop rivets to connect the aluminum together.
What I need is a recommendation for bonding the foam to the aluminum and sealing the aluminum joint.