Which receiver tube

[Wildcat]

If i use http://www.amazon.com/Ultra-Tow-2-I...13&keywords=2.5"+receiver+tube#productDetails this tube, will i be able to switch between a max coupler, lunette or 2" ball mounted on 2" tube?

 

[rnArmy]

Yes. Anything that would fit inside a 2" receiver tube should work for you. I'm assuming your plan is to use this as part of your trailer's tongue.

 

[Wildcat]

yes. thats correct. thanks


Sent from my iPhone using Tapatalk

 

[highdesertranger]

I have done this on my trailer. it works fine. highdesertranger

 

[drgrenthum]

Wouldnt say everything will work. Currently, trying to figure out a way to remove the inner seem from my receiver tubing. The stuff in the link will surely work.

 

[Mark Harley]

I would try to find a raw version with no coating.
Then it will be ready to weld and paint with the trailer.
There is a seller on ebay that makes them to custom length.

 

[Wildcat]

I would try to find a raw version with no coating.
Then it will be ready to weld and paint with the trailer.
There is a seller on ebay that makes them to custom length.

have a link? i searched ebay for "receiver tube" but mostly got 6" and 12" lengths. 48" would work but id like it a tad longer.

thanks


Sent from my iPhone using Tapatalk

 

[Mark Harley]

Found one from summit but the cost is more than the one you posted.
JEM TUBE is the seller I bought from before and he made them to length with a safety collar and pin hole drilled.
He gave me a better price than others But i cannot find him on ebay now. try R and P trailers on ebay too. Randy has good deals.

This is the raw one from Summit.

http://www.ebay.com/itm/Curt-49480-...es&hash=item5b04b8543f&vxp=mtr#ht_1496wt_1121