98dango
Expedition Leader
What dose everyone hear use. I'm not talking I bought this arb bumper and theses bolt on parts.
My truck is usually in the 8k range and I want to jack it up off the slider. I also want a step so it will stick out side the body. However if it drops down on a rock I want the truck supported.
My initial thought was to use 2x6 1/4 box tubing. That is very heavy. I also was thinking 2x4 could work or even 3/16. I can build just about any thing but I'm no engineer.
Also my sliders will be just under 10 feet long and 18" from the frame. I had planned to use 2x2 box to build the mounts any and all ideas are welcomed.
My truck is usually in the 8k range and I want to jack it up off the slider. I also want a step so it will stick out side the body. However if it drops down on a rock I want the truck supported.
My initial thought was to use 2x6 1/4 box tubing. That is very heavy. I also was thinking 2x4 could work or even 3/16. I can build just about any thing but I'm no engineer.
Also my sliders will be just under 10 feet long and 18" from the frame. I had planned to use 2x2 box to build the mounts any and all ideas are welcomed.