quarter round aluminum extrusion

[fog cutter]

anyone know of a source for quarter round aluminum extrusion (similar to 80-20 part # 1517-LS http://8020.net/T-Slot-4.asp#15 Series) with a larger radius?

it would not need to be a full compliment of components, but just the cornerpieces i need. maybe 2 1/2" radius? could actually be fiberglass or PVC and i'll paint.

thanks

 

[DaveNay]

Bosch

http://www.boschrexroth.com/en/us/p...gy/aluminum-structural-framing/profiles/index

and Palletti

http://www.paletti-usa.com/

Both have large radius corner pieces.

 

[fog cutter]

fantastic; thank you. i'll call them both early in the week for catalogs & distributors.

 

[DaveNay]

fantastic; thank you. i'll call them both early in the week for catalogs & distributors.

Unfortunately they are not going to interconnect with 80/20 products so you usually have to do an entire project with a single vendor.

 

[fog cutter]

that's not going to be a problem for the intended purpose but i appreciate the heads-up.

have to say, i think some of the "erector set" projects tend to be an exercise in and of themselves (to the exclusion of the original intent.) never the phrase "perfection of means - confusion of goals" has been so well applied.