canter rims

[alan]

I have found some 16"x7" steel rims with 82mm offset, can anyone tell me if these will work? these are news rims off the shelve.

[engineer]

On the old model, we used to use the original rims with only the outside rear and the track was perfect, from memory, it changed with the 637 ( 4.2 lt model?) then we used flat centres and the track was perfect again. I'll measure it up tomorrow when i do a brake adjustment and post tomorrow evening.

[pattersonimages]

Just received my rims from Stockton.
Specs I had been given, and ordered for a 91 4x4 canter were as follows... ( and I'll let you know how they fit when they are mounted) Was told that the rims should line up perfectly, and be able to use the spare front or rear....

STUD PATTERN 5 ON 207.86MM P.C.D.
BORE HOLE 152MM
STUD HOLE SIZE 32MM WITH 90 DEGREE CHAMFER TO SUIT WHEEL NUT.
183mm backspace.

Jeff

[alan]

Thanks Jeff,
Will be interesting to see them on the truck.

[alan]

I have been looking at this company, they have a large range of rims and tyres.
www.l-guardtire.en.alibaba.com

[engineer]

Sorry i haven't measured it for you yet, both my little 649 have been working in daintree, i will get to see them eventually......

[pattersonimages]

Looks like my started project will have a new home this week, but the rims will not be headed out with her! ( at this point) SO, I am now sitting on the above mentioned 18"x9" stocktons... anyone with an older FG interested pm me... I'd like to get out what I spent... or somewhere reasonably close. It will save you the 2 month wait! Only thing is.. the are in BC Canada, and they are HEAVY!!!

Thanks
Jeff

[39Ronin]

Jeff, call me. Lets talk about the rims.


Cheers,
Neil

[pattersonimages]

Hey, come by this next couple days to check them out... Sounds like the buyer is taking them... but it'll give you something to look at if your considering it! You have my number!
Jeff

[alan]

Engineer,
did you get to measure your rims?