wheel bearings

[jatibb]

91 classic, after hearing and feeling a slight noise coming from the front end i decided to look and,well, bearings had welded themselves to the stub axle and all that was left was a pile of metal dust in the hub. (200+k miles, probably never lubed, rh side is ok, nice and juicy inside)
good thing i have a parts car, any way i want to replace all from bearings. i found the wheel bearing at napa, but does anyone know a generic (timken) # for the small roller bearing inside the stub axle for cv support and also a generic # for bearing seals, thanks....

[Pad]

I thought I saw an alternative parts list on a Canadian LR site, Attowa Land Rovers? Not sure on spelling. Or you could check on Terri-Ann's site, I have found that starting on her site usually puts an end to all the searching.

Happy hunting!

[KevinNY]

Go with the RTC3511 bearing oil seal.

[jatibb]

thanks...

[revor]

Set 37 bearings at the bearing store of the autoparts store.
X2 on the RTC3511. Not sure on the little needle bearing thingy i just swept up a dozen and tossed them?!?! Ommited with Toyota conversions.
The local bearing store should be able to figure it by dimension though.