Full size trailer build.

[klmore]

Here are a couple of tank shots.



I'm going to have to protect this plastic gauge cover some how.



The fuel filler neck fit out of the front great. I'm still going to redo the front part of the trailer to include a platform for more gear and a place to stand.

The texture to the front is the Gator Liner that has been painted over. It is similar to a very thick rocker panel coating that is paintable. This should withstand rock chips and other debris hitting the front of the trailer.

[klmore]

Problems:

I can't find any center caps for the H2 wheels. A petty problem, but it still bothers me.

The spare will not fit in the bed with the four wheeler in the back. I'm thinking of a rear bumper with a swing out tire carrier. Someone also suggested using a tire lift from a Tahoe and mount it under the trailer, but I don't like that idea.

With the four wheeler in the back it is very well balanced. Without the four wheeler it is front heavy. I can still lift it, but it is heavy and that is with out 45 gallons of fuel. I may put a water tank the the back to offset the weight of the fuel.

I still need to fab some shock mounts since I removed the old axle.

I really need to address a parking brake. I loaded it down with almost a cord of firewood and as I was unloading it the trailer kept moving about. I almost fell out once, not a pretty site.

The tail lights are functional, but will not work off road. They hang down low and will without a doubt get torn off. I need to flush mount some LED's in the tailgate.

The highlift jack is rusting and dripping all over the paint. I need to prep the jack better, grease it, and wrap it in a cover of some sort.

[jdholder]

That's cool! I want one.

Great job!

[TexasFJ]

To resurrect an old thread...

Exactly which axle did you use? PN or specs would be great.

PN's and/or dimensions on the boxes?

Where did you get the 'drop' lunette? PN?

If you can't guess, I'm doing much of the same thing right now.

Thanks,

[Mark Harley]

If this was a 101A1 then the lunette came with it, It was rotated down.
Also the 101A1 comes with the older 5 bolt hubs with left hand thread on one side.
A new axle with 8 bolt pattern matches GM, Dodge and older ford 8 on 6.5 spacing.
with GM being hub centric and fitting best.

My build:
http://www.expeditionportal.com/foru...-family-hauler

[TexasFJ]

I plan on swapping the axle for one with 6x5.5 or 6x139.7 bolt patterns and a 108mm hub to match my FJ so I can run the same wheels. Also want electric brakes and maybe lighten the load bit.

Reading your thread now... good stuff!

[sapper]

Great idea. I really like it.

[Walker]

Wow, that is a great build!

[klmore]

I got some more work done to the trailer this past month. New rack on the front, mud flaps, and some other small things. We are currently building a new rack for the top. It is similar to a cover, but will allow for a tent and more storage.

Pictures to follow this week.

[Mark Harley]

Looks great, Post more pictures as you go.
We need more M101A1,2,3 builds.
I need more ideas.