Page 84 of 126 FirstFirst ... 3474828384858694 ... LastLast

Thread: Post favorite pics of your rig and trailer

  1. #831
    Quote Originally Posted by loren85022 View Post
    Very clever, Anza. Did you chop off the other side and create the awning?
    I really didn't change anything about the original pop up camper except for enlarging the wheel wells and building a metal frame to support it and allow for me to pull it off the frame.
    1997 Cherokee Sport, 4.0, Auto, 3" OME Lift, JKS Sway Bar Discos, 31" BFG ATs, Black Soft 8's, AJ's Rock Sliders, Stock Axles (for now).

    "If you've got a business—you didn't build that. Somebody else made that happen." -Barack Obama

    "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, it's inherent virtue is the equal share of misery" -Winston Churchill

  2. #832
    Quote Originally Posted by Mark Harley View Post
    Anza: You got me thinking about this. I could do this swap with my 116A2 frame.
    That would be perfect. I know I looked into trying to find a trailer frame that would work (for my purposes) with my Coleman Colorado, but I just couldn't find anything that wouldn't take a lot of modification. With you already having the trailer, you might be able to find a pop up that would work with that. I will say that it is the perfect solution for camping and hauling flexibility.
    1997 Cherokee Sport, 4.0, Auto, 3" OME Lift, JKS Sway Bar Discos, 31" BFG ATs, Black Soft 8's, AJ's Rock Sliders, Stock Axles (for now).

    "If you've got a business—you didn't build that. Somebody else made that happen." -Barack Obama

    "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, it's inherent virtue is the equal share of misery" -Winston Churchill

  3. #833
    Join Date
    Jul 2011
    Location
    North Carolina
    Posts
    112
    I did consider it. The previous owner had welded a piece of 1 1/2 square tube to the front of the trailer. It stuck out exactly the same distance as the bottm of the trailer. The carriers fit perfect there so I changed my mind. I did have to move the parking brake handle a few inches though.

    Quote Originally Posted by brentbba View Post
    Can't wait to see your progress with a lid. AT jerry can carriers? Did you even contemplate mounting them on the side of the trailer in front of the wheels? I've got a propane tank mounted where your carriers are and thinking about mounting jerry can carriers forward of the fenders.

  4. #834
    Join Date
    Jul 2010
    Location
    Menifee, CA
    Posts
    35
    Montezuma's Grade going to the SoCal Desert Rendezvous
    mont.JPG

    Current
    plate.jpg
    Last edited by shakotankei; 06-28-2012 at 05:31 AM.
    1994 Land Cruiser - OME 850/863, ARB front bumper, Slee step sliders/skid plates, Kaymar rear bumper w/tire carriers, Inti roof rack, 285 BFG KM2s, ARB awning, Camping Lab RTT, M101CDN

  5. #835
    Join Date
    Mar 2010
    Location
    Fresno, CA
    Posts
    219
    From Desert Rat from Humvee.net




    Last edited by Fresno; 07-01-2012 at 11:38 PM.

  6. #836
    Join Date
    Mar 2010
    Location
    Fresno, CA
    Posts
    219

    Default Desert Rat H1 Hummer and M101A2

    2011 Pismo Hummer Invasion

  7. #837
    Join Date
    May 2010
    Posts
    1,993
    That's got to get HOT inside the trailer!!

  8. #838
    Join Date
    Mar 2010
    Location
    Fresno, CA
    Posts
    219
    No, the inside was comfortable during the day and the night.

  9. #839
    Join Date
    Aug 2011
    Location
    Kirkland, WA
    Posts
    542
    Just picked up this Little Guy over the weekend. First plans are silver/gray repaint, 3" lift and rims/tires.
    RIPP GEN 2 w/ RIPP headers, Diablosport Trinity, 6 1/2" Teraflex, 38 KM2s, Trail Readys, RCVs, JE Reels, Currie Antirock, Redneck Ram, ORH Top, Bushwacker Flares, XRC 10 Comp, EVO 1/4 Pounder, Finishlinewest Rear Carrier/Bumper, Rotopax, Schrockworks Rails, OverKill Corner Armor, Rock Hard/AEV Skids, Warn VTC, ARB Fridge,.....

  10. #840
    Join Date
    Jun 2011
    Location
    Pennsylvania
    Posts
    2,022
    Bubblegoose1: That so needs to be reworked to match your jeep.
    Wheels, tires, Exoskeleton, paint I am waiting for the build!

Page 84 of 126 FirstFirst ... 3474828384858694 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •