Aeon Rubber

[able]

Hi, Can you keep us posted on how they go.
I see they don't list any for the front axle of the NPS300
Would mind catching up next year after I get back from my trip to Bris , Syd, Canberra
I see you buses go up through Mossman most days I am home.
Wadey

Have you done any more research on these for your NPS. We have a 1999 model that could use a set of these.

[1Engine]

Have you done any more research on these for your NPS. We have a 1999 model that could use a set of these.

Hi Able,
I am currently up north of Weipa at the moment with work, so there is not much time to do much research.
I was going to start looking into it in Feb when I get back from down south

[able]

Hi, would really be interested in what you come up with. Unfortunately our model of NPS doesn't really highlight on this site :-)
Maybe we could have one of our American or Canadian friends investigate for us.
Anyway don't work too hard up there, hope your wearing a hat.

[oka boy]

Hi all,we have the rubbers as std equipment on the OKA,front and rear these work really well and allow you to limp home if you brake a spring leaf as the vehicle will seat on them

[able]

the factory list price for the front is $230

and the rear is $425

that was for the '03-'09 FG type.

Still waiting on quotes from a dealer to see if they cut the cost any?

Hi and thankyou for the pricing details. It would be great if they made them for the NPS Isuzu.

[Jeep]

Hi and thankyou for the pricing details. It would be great if they made them for the NPS Isuzu.

Check out thier wbsite or a dealer, you can get them by dimension.

[DontPanic42]

This is way off topic but it is the reason I will not be working on my rig today. Guess the Old Farmer's Almanac was right predicting a cold wet winter for West Texas. Most snow I have seen here in years and never this early.

[able]

Hi Able,
I am currently up north of Weipa at the moment with work, so there is not much time to do much research.
I was going to start looking into it in Feb when I get back from down south

Have you seen these as another option? http://www.trelleborg.com/en/Automot.../Rubber-Tower/

[engineer]

I use them all the time. Check my equipment out at www.liteindustries.ca. They last forever, they are very good at stabilizing a chassis, they will squish as flat as a pancake but seem to do so very progressively. They are not real good on light rigs in the 1/2 ton range, they give a bit of a bounce when they hit on a light rig but you don't notice anything adverse when loaded or on a heavy rig. I use them as a bumpstop as well as a load assist. Great product. I've used them in some very severe environments and have never wrecked one.

Can I buy a set of Aeons from you as Timbren won't answer my emails..????

[Jeep]

Can I buy a set of Aeons from you as Timbren won't answer my emails..????

Yeah no problem. I only recieved one email today and responded to the email address provided.