Mark Harley
Expedition Leader
When I bought the trailer It had the Lunette from the military with surge brake system.
It was non functioning so I removed all of it reducing the weight by over 250 pounds.
I cut off the landing leg and mount and welded on a 4 position receiver mount. I have a 2" ball mount for the street
and a 2 1/2" lunette for the trails. Pull two pins and change them out. It is also good for theft deterrence.
Remove the set up and "No steal"
Here is my build blog.
http://www.expeditionportal.com/for...d-a-Military-trailer-to-build-a-family-hauler
It was non functioning so I removed all of it reducing the weight by over 250 pounds.
I cut off the landing leg and mount and welded on a 4 position receiver mount. I have a 2" ball mount for the street
and a 2 1/2" lunette for the trails. Pull two pins and change them out. It is also good for theft deterrence.
Remove the set up and "No steal"
Here is my build blog.
http://www.expeditionportal.com/for...d-a-Military-trailer-to-build-a-family-hauler