Engel footprint

[Mountain Goat II]

Not sure where's the best place to ask this question. I need to know the dimensions, rubber mount to rubber mount on the Engel MT35 or MT45

I want to use one of these with my fridge

just not sure the Engel and my model of Norcold have the same footprint so to say.

Thanks for any help.

 

[Corey]

That Slideloc is made for both the old style 45 ARB and the Engel 45.
I am running the Slideloc in my rig.
It comes with new feet to replace the stock ones on the fridge.

Oh shoot, just realized you had the Norcold.
Been a hard day at work here today
Tired...

 

[Mountain Goat II]

Cory,

If you get a chance could you measure the distance between the feet on your ARB?

Thanks in advance

By the way, I dig the work you've done to the rig.

 

[Corey]

I can try, but it would not be until the weekend.

Thanks, the rig has been fun to build.

If memory serves me right, the Norcold is basically the same unit as the Engel and ARB.
I could be wrong, but I may have read that in the Overland Journal fridge shootout from a few years back, or some other place online.

 

[Mountain Goat II]

I can try, but it would not be until the weekend.

Thanks, the rig has been fun to build.

If memory serves me right, the Norcold is basically the same unit as the Engel and ARB.
I could be wrong, but I may have read that in the Overland Journal fridge shootout from a few years back, or some other place online.

Great, I can wait til then.

 

[Corey]

I could not loosen the fridge form the slideloc, the button seems to be stuck for right now.
But I was able to get a tape measure in there I measured from screw to screw on the feet.

Hope this helps and is close to the dims on your Norcold.
This is an older picture, same as the one posted above.

 

[Mountain Goat II]

Thanks, for the information Cory. It looks like the feet spacing of the Norcold is wider. Not good. Back to the straps.

Thanks again, you saved me alot of trouble.