Using the OEM Steel Spare Wheels?

[The BN Guy]

Looks good! Love the whole white/black wheels/soft topper look.

Whyyyy thank you!!!

[Project510]

Whyyyy thank you!!!

What rack is that? How is it mounted.. I want to do this before Sept, would appreciate the info! man i have looked over so many photos and no one has anything like this on a 1st Gen

Thanks,
James

[The BN Guy]

That's a Yakima Loadmaster I believe. Mounted using the stock (from Yakima)mounts. I bought it from a friend years ago. I can try and get some pix up on it sometime. Bear with as we are headed back to school and...well, I'll just say it's gonna be a tough year.

[fishy_frontier]

Whyyyy thank you!!!

Haha yup that comment was aimed at you too

[Project510]

That's a Yakima Loadmaster I believe. Mounted using the stock (from Yakima)mounts. I bought it from a friend years ago. I can try and get some pix up on it sometime. Bear with as we are headed back to school and...well, I'll just say it's gonna be a tough year.

That would be awesome thank you

[The BN Guy]

Sorry I haven't posted the pix. This has been the toughest school opening I've had in my ten years as a teacher.

I promise I'll get the pix ASAP.

[mcm4090]

I did not get to weigh them but the wheels seem a bit heavier then the 17" alloys but the tires may be lighter then the wider ones I had. So it may be a toss up on that, if any thing a bit heavier then be for but not noticeable on the road

I had Cragar soft 8 steel rims at one time on my truck and they were 10lbs heavier per wheel then the stock wheels. They were 8" wide though. How wide are the stock one? 6 or 7 inches wide?

[OzX]

i had cragar soft 8 steel rims at one time on my truck and they were 10lbs heavier per wheel then the stock wheels. They were 8" wide though. How wide are the stock one? 6 or 7 inches wide?

7

[Project510]

Sorry I haven't posted the pix. This has been the toughest school opening I've had in my ten years as a teacher.

I promise I'll get the pix ASAP.

Take your time haha. Thanks again!