Please help a newb!

[SeattleNate]

Long time reader first time poster.

My wife and I have been looking for an FJ60 for quite a while. We recently located one close and within budget. We are new enthusiasts, and are hoping someone would be willing to scope these picture and give us any pointers.

I test drove it (and for the first time any FJxx) and noticed some things...

Cold blooded; it needed lots of choke for quite a while.

RMP; 2500. Thats where it runs and shifts. No negotiation.

Ticking; Are valves noisy in an '87? Have my ears been spoiled by our modern cars or are we going to have to rebuild this thing after it lunch's a valve in 2 months? It was rebuilt once "in the past" but 300k on a block is quite a lot. A compression test seems high on my list of to dos.

Seals; This thing is leaking like a... well, an old car. From the oil pan/transfer case, rear diff, power steering hose coupling, front axel hub, etc, etc... we can tell its been sitting for a while.

The winch; "Mickey Mouse" was my first thought.

We have budgeted for some repairs and many are quite simple but over all I'm worried that the $2000 price will balloon to $5000+ for a reliable rig. Or am I nuts?

Any help would be greatly apperciated,

Nate

[Terrainist]

Just to be clear, this is a vehicle that you are thinking about purchasing? Or have you already bought it?

Can you do quite a bit of the wrench work yourself to make things the way they should be? Or are you going to have to take it to a shop to get everything worked on?

Sometimes search engines aren't the greatest, but I imagine the "what to look for with these" question has been asked before. Being able to find the thread with the answers is a crapshoot. Maybe someone else can chime in with some pointers.

[Hltoppr]

I think your gut reaction is accurate. That winch/bumper combo is jury rigged to say the least, and the shifting is a concern.

Maybe good at $1500 or lower, but you're likely going to need to put at least $1000 into it to do some basic maintenance.

-H-

[NorCalLC]

Welcome to ExPo, thats quite a rig you're looking at there.

It seems pretty high priced $2k for 300 miles and with all the leaks etc you mention, are you really ready to do a lot of your own wrenching on it?

I found several just like it when I was looking a few years ago and for a little more money, you can usually find a lower mileage unit thats been cared for a lot better. There are even a few for that same $ amount, but you have to search around a bit.

No matter what though, it's an older rig and almost all in that range will need a good bit of PM to trust it on trips. There's another great site a lot of ExPo folks belong to IH8MUD.com
The site is a wealth of info on all the cruiser models and there's a great classified section with a ton of rigs for sale.

Good luck

[SeattleNate]

Just to be clear, this is a vehicle that you are thinking about purchasing? Or have you already bought it?

Can you do quite a bit of the wrench work yourself to make things the way they should be? Or are you going to have to take it to a shop to get everything worked on?

Sometimes search engines aren't the greatest, but I imagine the "what to look for with these" question has been asked before. Being able to find the thread with the answers is a crapshoot. Maybe someone else can chime in with some pointers.

Thanks for replying! I have a day to close the deal so I figured I would ask every one I know.

I will be working on it my self. I have done lots of work on cars and bikes; but it doesn't mean that I dream of pulling engines.

[SoCal_80]

That winch/bumber setup looks like a fatality waiting to happen!

[a.mus.ed]

Find another one.

[MarcFJ60]

I agree with the others about looking for another. Sometimes, even when priced right, it isn't the right rig for you. It looks fairly clean and if the rebuilt engine could be verified, it might not be a bad deal for somebody at $2000. But it also needs a lot of work and if your not the person to do that work, move on.

And as others have said, given that winch setup, I would wonder what else has been rigged up in it.

About the valves - the best way ot describe the FJ60 engine sound is that of a sewing machine (if it is running right). Not clanks or rattles, but definitely not quiet. You may also want to consider an FJ62 for the EFI and automatic transmission (as well as power windows and power locks).

$2000 landcruisers are all over the place. Be patient, you'll find the right one.

[SeattleNate]

The negotiations went better than expected so we have a new member in the fam.

So I am now looking for a exploded diagram of the carb! Need some tuning.

[Terrainist]

Congratulations!!