Explorer
Front Runner Roof Rack, 2.2M, LC100 or LX470, Scratch and Dent - SOLD
SOLD
This arrived from the vendor with a dent thanks to the trucking company. The vendor is sending me a new one and we are selling this as a scratch and dent. You pay me, I send the money on to the vendor.
$500 if you pick it up in the 94531 zip code. That's less than 50% off any in stock vendor.
For an additional $100 I can bring it to the Hollister Rally on Sunday Sept 26.
Other than the custom artwork, this is perfect. I could not find any damage to the welds or paint.
Last edited by ThomD; 10-03-2010 at 01:29 PM. Reason: new lower price
http://www.tandemhearts.com/
You can't jump the track,we're like cars on a cable
and life's like an hourglass, glued to the table
No one can find the rewind button
Explorer
Bump for a new price.
You know you want to score this deal when you go to Hollister.
http://www.tandemhearts.com/
You can't jump the track,we're like cars on a cable
and life's like an hourglass, glued to the table
No one can find the rewind button
Explorer
So tempting....
It' would need to fit through the garage door. I have clearance issues. I have been thinking about these racks. They look to have a real low profile. Right now I run Yakima bars and old style Yak baskets and I need to remove the rear basket to get the rig into the garage.
Hmm....
Last edited by Cabrito; 09-19-2010 at 03:47 PM.
Michael G |2011 FJ Cruiser "NSSE"| 00 KLR650|TLCA #16374 | KI6ELZ
Explorer
I'll drop a string off the side and give you a measurement.Originally Posted by Cabrito
-t
http://www.tandemhearts.com/
You can't jump the track,we're like cars on a cable
and life's like an hourglass, glued to the table
No one can find the rewind button
Explorer
Rain gutter attachments right?
I'd need a measurement of how high it sits off the roof. This might be specific to the vehicle though. What is is on yours might not be the same as mine?
Michael G |2011 FJ Cruiser "NSSE"| 00 KLR650|TLCA #16374 | KI6ELZ
Explorer
My wife pointed out that a "drop the string" measurement introduced too many variables. Here are the measurements from the top of the rails to the roof. In the front image, the measurement is to the roof under the inside of the rail, but I had to move the square so we could see the numbers.
These racks install right over the top of the rain gutters. (Or at least mine did, there were no instructions for that part.)
Rear:
Front:
http://www.tandemhearts.com/
You can't jump the track,we're like cars on a cable
and life's like an hourglass, glued to the table
No one can find the rewind button
Explorer
BTW, these mounting rails are for a 100 series. I have no idea if they will work for an 80 series.
http://www.tandemhearts.com/
You can't jump the track,we're like cars on a cable
and life's like an hourglass, glued to the table
No one can find the rewind button
Adventurer
Does this include rails, feet & hardware?
Explorer
Rails, feet, hardware, wind deflectors, instructions, the original box if you want it.
When I installed mine yesterday I pulled the hardware out from this kit because I thought I was missing something. (I wasn't). I think there may be one washer that scurried away from me under the bench. Other than that, it's all there.
http://www.tandemhearts.com/
You can't jump the track,we're like cars on a cable
and life's like an hourglass, glued to the table
No one can find the rewind button
Adventurer
Who's driving from Antioch to Utah?
How long are the track rails?
Posting Permissions
Reply With Quote