Side Mount Battery Terminals

[Roaming Robertsons]

I need to find a couple of side mount battery terminals. The only ones I've found are a clamping style like shown below. I need two side mount terminals but with a single bolt in the middle rather than the clamp. My cables already have ends on them.

 

[Maximus Ram]

So do you want to mount the cable to the side like they mount on top..if so, then what about these

[ame="http://www.amazon.com/Pico-0893PT-Battery-Adapter-Package/dp/B00030CPC8"]Amazon.com: Pico 0893PT Side Mount Battery to Post Adapter 1 Set per Package: Automotive[/ame]

or are you wanting to attach accessories...then maybe somthing like this

http://cgi.ebay.com/BATTERY-TERMINA...019?pt=LH_DefaultDomain_0&hash=item53d7f675cb


I have something similar to these for my accessories on my DH Platinum.

 

[Roaming Robertsons]

So do you want to mount the cable to the side like they mount on top..if so, then what about these

Amazon.com: Pico 0893PT Side Mount Battery to Post Adapter 1 Set per Package: Automotive

Nope, I actually need what is pictured in my first post, just with a single bolt instead of the dual clamping bolts. I've searched all over. I shouldn't be this difficult.

 

[Maximus Ram]

Never seen any with a single bolt.
Closest I could find is about 3/4 of the way down the link here


http://crimpsupply.com/battery-terminals-copper-lugs

 

[Roaming Robertsons]

Never seen any with a single bolt.
Closest I could find is about 3/4 of the way down the link here


http://crimpsupply.com/battery-terminals-copper-lugs

Apparently I'm looking for something that may not exist. I've attached it temporarily with the connector pictured with one of the two bolts through the end of the wire. It looks odd but gets the job done. If I can't find one, I guess I'll have to find someone to do some minor mod work.

 

[Johnston]

Something like this? http://www.tessco.com/products/displayProducts.do?groupId=619&subgroupId=25

 

[Roaming Robertsons]

I think I figured out the problem. Basically, there is no need for what I'm looking for normally because of you have a looped end to your cable, you just connect it directly, without another connector. I have an OEM fuse block at the end of the battery cable so when I switched batteries, it doesn't quite reach the terminal. I'm trying to find a solution but what I want, doesn't have a purpose in other applications.

 

[NYCO]

Similar question, 4+ years later. Looking to add dual battery setup on a GMC Savana with a side post battery - this should work right? http://www.amazon.com/WirthCo-30500...1424816225&sr=8-4&keywords=side+mount+battery

 

[Mwilliamshs]

Yes if what you want is to add an additional cable directly to the battery post.

Safer to use a junction block and can work out cheaper and with less voltage-drop that way too since cable lengths can be equalized and runs made shorter overall and connections placed more conveniently.