Thread: Rumble/rattle

  1. #1
    Join Date
    Dec 2008
    Location
    Mesa, AZ
    Posts
    222

    Default Rumble/rattle

    The Jeep developed a low rumble and now a rattle at speeds over 35 mph. Accelerating or coasting, no differance. I'm thinking a driveline ujoint is going bad. All ujoints seem ok when I've crawled under and rotated the driveshafts by hand. Any ideas?
    2005 Land Cruiser
    2007 Unlimited Rubicon - Sold
    2007 Horizon A/T

  2. #2
    Join Date
    Jun 2009
    Location
    Olympia, WA
    Posts
    386
    Have you rotated the tires? Mine developed a similar rumble and it turned out to be the front tires were wearing funny. Some lugs were lower than others, .25" or so in an alternating pattern around the tire.
    2013 Jeep Rubicon unlimited
    www.northwestoverlandsociety.org

  3. #3
    Join Date
    May 2010
    Location
    Columbus Oh
    Posts
    96
    Tires becoming unbalanced can do this too. Rotate and balance may be
    the key.
    Veritas et Aequitas

    My XK Build

  4. #4
    Join Date
    Mar 2008
    Location
    san diego, ca
    Posts
    4,355
    Quote Originally Posted by F5driver View Post
    The Jeep developed a low rumble and now a rattle at speeds over 35 mph. Accelerating or coasting, no differance. I'm thinking a driveline ujoint is going bad. All ujoints seem ok when I've crawled under and rotated the driveshafts by hand. Any ideas?
    turn up the radio?
    "For He so loved the world, that He sent His only son..."

    Brian
    KJ6GXX
    1992 XJ:"Daddy's Jeep" - The "Please don't hit my Jeep again!" Edition.
    2009 Ford Edge
    :"Penny"- "Mama's new ride, and our new trip car"

  5. #5
    Join Date
    May 2008
    Location
    NW Ohio/Dodoma,Tanzania
    Posts
    437
    U Joints can sometimes appear to be OK
    had one for a friend I was working on , and he said it had a vibration, checked the u joints felt tight etc.
    Took it for a ride, yes a lot of vibration, pulled it back in the garage and just happened to touch the rear joint and burnt my hand almost.
    The rear one was toast, felt tight and seemed to turn OK but was all rusted solid almost
    04 Jeep Liberty, 4.25 inch lift, 32 inch Duratracs,4.10s Yukon axles and a bunch of other heavy stuff

  6. #6
    Join Date
    Oct 2010
    Location
    Vancouver, BC
    Posts
    140
    I just replaced my tie rod ends, hoping my rattle/wobble will go away too... Only after jacking up the jeep and shaking my tire, I realized my ball joints are shot.
    I had exactly the same funny tread wear pattern...
    Just a thought.
    Sam


    Sent from my iPhone using Tapatalk
    '07 JKUR Expo Built with Matching CDN M101+RTT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •