F150 trucks

[txflyyaker]

YJay
check out the picture on post #28. I like the bumper, it has openings for 6" and 4" lights already drilled to accept a winch. I have a 4.5" Superlift and have not notices any sag in the front. You will notice the wind at highway speed and fuel mileage will suffer some. It it a TrailReady Basic. Installation was easy, no loose bolts or brackets but make sure to torque the bolts to recommended specs.

[Bob599]

I believe Aluminess makes one. They claim a much lower weight and the ability to add winch, lights or really anything you want.

[Aluminess]

Our bumpers weigh an average of 85lbs and accommodate winches and lights. If there is something specific that you are looking for just let us know and we will try to work something out. Here are a couple of pics of a bumper we did for an F-150.

[Robert B]

Our bumpers weigh an average of 85lbs and accommodate winches and lights. If there is something specific that you are looking for just let us know and we will try to work something out. Here are a couple of pics of a bumper we did for an F-150.

I'm in San Diego and am interested in a bumper for a 2007 F150, similar to what is in your post, but without the grill guard.

[Aluminess]

I don't want to clutter up this thread with product information. If you have any questions you can send us a PM, e-mail us at aluminess@sbcglobal.net or call us at 619-449-9930.

[Mad_Texan]

Any other F150 projects in works? Here is mine...

[Mad_Texan]

And my fathers in Canyonlands a couple of weeks ago...