Derek's 'BST' Tundra Build

[Derek24]

To all those left out, overlooked, very capable 1st Generation Tundra owners, I present to you my ‘2000 Toyota Tundra build’ (Say that five times fast). I’ve always wanted one of these trucks from the first time my Dad pull up the drive way in a shiny green one in late 99’; probably the first one bought in the Bay Area (now I realize why he told me to sweep out the garage-“I’ll be back in a minute”). It took 8 more years till the day all my slaving paid off and I bought my Tundra in High School. Coming up on four years of a love and hate ownership I would like to take you on my journey of my never ending build. I hope I can inspire future Tundra owners and added to the wealth of information on this site. Here we go…

When I first bought it back in 2007

[Derek24]

Next I installed my wheels and tires I had on my old T100 onto my Tundra. Also gave it a nice detail job.


Now that I had tires and wheels and being 16 at that time I wanted lift. So I order a 3" spacer lift and a single AAL for the rear.

[Derek24]

A couple of days later I had a 14" magnaflow installed. (Had to impress the girls right?)



Next up was bigger tires: 285/75/16. I opted for some cheapo tires off of craiglist. I got all four for $400, which made me happy because making $9/hr at the time it was hard to get BFG's. They worked well offroad, but wore quickly.

[Derek24]

Next I added a Waag pusg bar that I took off my Dad's Tundra he was selling at the time.


After 4wheeling my Tundra for a while I concluded that an open end rear end is not going to cut it. I purchased and installed myself a Powertrax No-Slip Locker. It was a great unit and 100x better offroad, but being a automatic locker it killed my 285's in 10k miles and was scary driving in the snow. It got old after about a year.

[Derek24]

I then found a killer deal on a Deaver 10 Pack on craigslist. I also order some Bilstein 5100's to go with the Deaver's. I loved this setup. It felt like riding in a Lexus; very smooth. Although it was a luxury I eventually removed and sold them because I carry motorcycles in the bed almost every week. If you don't carry alot of weight i recommend these springs!

[Derek24]

Next up was a big day: new tires, Camburg UCA's, 5100's up front. Again I got a great deal on my Camburg UCA's-from the same guy-and decided to go the 5100 route up front and get rid of the clunk caused by the 3" spacer. Strapped on cash I again purchased the same tires, from the same guy, for the same price, but 265's this time. Not sure why I went down a size; mood swings I guess?

Out with the old


Stock UCA out


Camburg UCA and 5100 in. 5100's set on 4th notch-2" lift.


New stance

[jim65wagon]

To all those left out, overlooked, very capable 1st Generation Tundra owners, I present to you my ‘Two-Thousand Toyota Tundra Transformation’ (Say that five times fast).

Cool! Another Tundra build thread! Exactly what this forum needs!

I fixed your Tundra tongue twister so it reads with all "T"s and you can call it the 5T build for short......

Keep posting!

[Derek24]

I then added some tint. I bought a DIY tint kit off of ebay. All the windows were pre-cut for my truck, all I had to do is make sure all the windows were clean and then apply the tint. For $30 I spent I love it. There are some flaws, but it works and it was a fun project. 30% front, 5% rear which comes out to be close to 2% since its over the factory tint. Yes its hard to see out at night!

[Derek24]

Let's see (I'm digging through alot of pics) next it was time to get rid of that annoying exhaust leak. JBA Headers were on order.

I have to thank my buddy Matt (Returias) for helping me with this project. After 2 days in his garage we both limped out into the sun for some natural healing. Ten bloody knuckles, a stiff neck, and a broke back we were done!









I do recommend the JBA's. The added power is noticable and well worth the install.

Sound video
[ame="http://www.youtube.com/watch?v=z9YnpQWIE90"]YouTube - Toyota Tundra with JBA Headers[/ame]

[Derek24]

As mentioned before, I got tired of the automatic locker and being I just bought new tires I did'nt want to kill them in less then a year like before. So, after researching for weeks, I was set on an LSD to replace the Powertrax. After a trip in my brothers old 02' Tundra with the factory LSD I changed my mind and had to stay with a locker. ARB was having a special about a year ago, if you buy a locker you get the compressor for free. Thier promotion work on me and an ARB RD129 was on order.








I love this locker!
[ame="http://www.youtube.com/watch?v=LxQK_N0xfA8"]YouTube - Testing the ARB Locker[/ame]