"The Border Runner" build thread: '87 4runner built for epic PanAm journey

[Ruined Adventures]

1987 Toyota 4Runner DLX - purchased with 237,000 miles for $2,500
22RE 2.4L engine - previous owner rebuilt it at 203,000 miles because it needed a new head gasket "Why not?"
W56 5-speed transmission
4.10 geared differentials

I bought this vehicle from the 2nd owner and it was impressive how detailed the records were between them and the original owner. Everything was well detailed and whenever there was a strange sound or noticable problem, they didn't hesitate to take it in for repairs.

After a few cross-country test runs in bare bones stock mode with a simple sleeping platform, we had a few ideas for what we wanted to change. Our focus was on making it more efficient to setup camp, more reliable, and as comfortable as possible. Our plan was to try and sleep inside the vehicle as much as possible during our journey so we wanted to turn the 4Runner into a micro-RV. Many nights we figured we would want the ability to sleep inside incognito, when it's not possible to find a proper place to camp or if we're just trying to save money in larger cities. This vehicle is purpose-built, as we are driving it from the US thru Central and South America over the next year (or longer).

The 4Runner had 237,000 miles when I bought it. We headed south with about 260,000+ miles, but we planned to add another 30,000 over the course of this adventure. EDIT: as of March 2013, we now have over 282,000 miles when we left the vehicle in storage for six months in Uruguay. We'll be back in October to put another few thousand on the clock in Patagonia, before we ship the vehicle back to the states for some R&R.

Storage Upgrades:
Door pockets recycled from bucket storage
"The Anti-Sleeping Platform" rear storage solution (still enough space for "upgrades")
Interior bungee net to hang objects from roof
Homebuilt steel safe for security and to flatten the sleeping area
Locking ammo-can console and Tuffy cupholders
Library space for travel books
MV50 Air Compressor wedged under hood
5 gallon Scepter water can behind pass. seat for drinking water, cooler spigot added to bottom for easy pouring

Comfort upgrades:
5" thick twin sized gel-foam matress (37" wide)
Removable mosquito netting
Seats salvaged from an SR5 UPDATE: I've already worn thru my seat and I can feel every peice of metal I'm sitting on. I REALLY need to have them restuffed!

Security:
Butchered our perfect body panels to install Hockey Puck Locks
Locking fuel cap & tinted windows

Electrical Upgrades:
Dual Odyssey PC1200s in extended battery tray UPDATE: 200A continuous duty solenoid fried in Costa Rica, replaced with Guest 2111A manual switch...still going!
Added multiple 12v charging stations, 300W inverter for charging laptop while driving, and lots of efficient LED lighting
Fantastic Fan installed in hardtop
DLX gauge cluster replace with full gauge cluster from SR5 for tach and tripometer
Viper Alarm installed by a stereo shop before departure UPDATE: rebuilt the Alternator in Guatemala after shoddy alarm installation caused an electrical short

Steering, Suspension, etc:
OME suspension with Zuk mod in rear
245/75r16 (E) Treadwright AT's on Tacoma steel wheels UPDATE: These tires have been wearing great! Not a single flat so far, though I did wish they performed a little better on slick surfaces (wet pavement, mud)
Replaced all brakes, rotors, and drums UPDATE: rebuilt the calipers in Ecuador after the pistons were starting to leak
Replaced steering: tie rods, idler arm, pitman arm UPDATE: replaced the idler arm in Guatemala after the road to Semuc Champey annihilated it!
Replaced ball joints UPDATE: replaced the same ball joint two more times on RH side (found out the OME t-bar was torqued down too tight, allowing excessive travel)

Expen$ive Add-ons:
ARB 2500 awning purchased in Panama, broke during 1st week of using, thanks to freak Colombian HAILSTORM!

Unnecessary junk:
Ghetto craigslist bumper guard
Rear Swingout for mounting waffleboards, jerry cans, and additional cooking surface
Super special overland stress-relievers

Misc. Repairs on the road:
Replaced fuel pump in Panama

[4Rescue]

OOOOOOh, I will be following this build with great intrest... You really piqued my intrest with the "removed the console" bit... I was gonna go the other way with a Tuffy console, but now that I went and looked at it, I think I may follow your lead seeing as I too sleep in the back of my 1st gen. SUBSCRIBED SIR!!!!! Keep it coming, I've always liked your rig mate, now I just have to remember what your screen name used to be to keep reference eh

Cheers

Dave

Edit: Are you planning on sleeping two in the back??? Cause if you haven't done it yet, I highly suggest looking at the width of your proposed bed. My fiance is a small gal (like 5'3 and maybe 125+ - vnot that she'll ever tell me such things ), and at 6' m200lbs I'm not a "husky" guy and we use every bit of the full width of the rear area to sleep comfortably. I'm wondering how you're gonna fit with 14" (as in 7" on each side) removed from that space... if it's just you I can understand that, but 2 abreast could be troublesome. When it's just me on rafting trips/travel, I sometimes set up my roll-a-cot in the back of my truck just cause I haven't buil the platform yet and I want to be able to store more stuff in back and still sleep...

[austintaco]

If it helps, I bought that sectioned sleeping/storage platform from that craigslist seller that had the kayline top without the frame. I have never even used it, but its an interesting idea.

You can check it out for an idea or use it. Its just sitting in my garage.

[defrag4]

Nice, so did you completely remove the rear interior panels of the truck? If so how much extra room did you gain on interior space? I imagine about 3-5 inches are hidden back there. Also, do you plan to remove the roll-bar? I am planning on taking mine out and creating a very short sleeping platform to raise up just above the wheel wheels, to allow for storage underneath and more sleeping room side-to-side, I tend to always roll over and end up jamming my knee up against the rollbar/wheel well currently.

[Ruined Adventures]

Dave, thanks for the kind words. I actually bought a 10" Tuffy console on Craigslist for a great price. I swapped in bucket seats from a 300z and made custom brackets so I could squeeze the oversized Tuffy in there, but the seats just seemed a little too far apart. The steering wheel was a little off too. While the stock console was out, it just made sense to go without a console. It's so much easier going from the cab to the back while camping. I have plans for a very shallow console just to keep small items in and to flatten out that space between the seats. If anyone wants a 10" tuffy console, let me know. I am keeping the cupholders

Yes, it will be two of us sleeping in the back (and possibly a dog in the passenger seat at night). My lady is borderline midget at 4'9" and 100 lbs. I'm only 6' and 175, and we will both shed a couple pounds before the trip. She always ends up tangled up on top of me at night anyways, so the space between the wheel wells is do'able. We've tried it out and it works perfectly for us...although I can easily see how it would be uncomfortable if either of us were any bigger.

We tried a sleeping platform for a year. It was two sheets of plywood of equal size, each with 4 legs consisting of 10" pipe threaded into flanges...I liked it for as a weekend warrior because I could break it down and keep it in there 24/7, hardly using any room. We often struggled with storage though because not everything fit underneath and grabbing anything that wasn't loaded toward the back was a major pain to reach. She wanted more space for changing and headroom, and I want to be able to sit up completely when it's pouring outside. I think this will be our best compromise between living space and usable storage.

Austintaco, thanks for the offer. I don't suppose you have a picture of that sleeping setup you're talking about? I'm curious...I actually bought that Kayline top from her. I still have to weld the frame for it though...one more thing on the list.

Defrag - The panels are completely out, and they are up for sale if anyone needs them. Sounds about right on with the dimensions. A couple spots you can find a little more than 5". It's not much, but it definitely adds up and it's perfect for most the parts and small items I carry. My MV50 fits great wedged in there (I lengthened the battery clamps to reach). I ditched the rollbar and when the soft top frame is done it will be reinforced to serve for some rollover protection. We won't have anyone riding in the back though while we're driving. Just make sure you make some sort of access panels if you do a sleeping platform. It'd be really slick if you used mattress foam that were cut into sections to match the access panels.

[ab1985]

Subscribed. Get some pics up soon - I need motivation to keep working on mine.

[Ruined Adventures]

Patience...I need to make more progress before I can share all the juicy photos with Expo. I've been working a ton lately & since the 4runner is my daily driver, that makes things difficult

[Toyotero]

Besides, why not build a little suspense? How about another teaser...

Ha ha, amusing photo. :-D
I'll be reading along with the build. The plans and truck look good so far.

[suntinez]

Shady has the best travel tips ...

[Toyotero]

Aux lights like those could be useful for illuminating the sides of the roads. In Latin America, there are a lot more animals, people, drunks, etc that are walking/stumbling/sleeping/etc on the edge of the roads, especially in rural areas where municipal lighting is non-existent. I remember many times while living in Nicaragua desiring more illumination off to the roadsides, especially on Friday/Sat nights.

Do you know how old they are?