fxk142
Observer
Hi guys,
I just purchased an M416 that I plan on fixing up into a camping/expedition trailer. I am currently running 35x12.5x17 wheels, which are 7.5" wide with a 47.3 mm offset, and I would like to run these same wheels/tires on the trailer so I only carry one spare.
I know reading the owners manual I found online here that the axle width on the M416 trailer as it sits is 58.75" with a tub that measures 41" wide, and 4.5" wide wheels.
Now if I do the math, and I am trying to get the same clearance between the tire and the tub (about 4.375"), then I will need an axle width of 71.235", or a standard 71" axle. Does this seem correct?
I am thinking of upgrading to a 3500 lbs. axle with brakes. Any recommendations???
I just purchased an M416 that I plan on fixing up into a camping/expedition trailer. I am currently running 35x12.5x17 wheels, which are 7.5" wide with a 47.3 mm offset, and I would like to run these same wheels/tires on the trailer so I only carry one spare.
I know reading the owners manual I found online here that the axle width on the M416 trailer as it sits is 58.75" with a tub that measures 41" wide, and 4.5" wide wheels.
Now if I do the math, and I am trying to get the same clearance between the tire and the tub (about 4.375"), then I will need an axle width of 71.235", or a standard 71" axle. Does this seem correct?
I am thinking of upgrading to a 3500 lbs. axle with brakes. Any recommendations???