I started this build with the intention to sell my M101CDN trailer after having a top fabricated for it. In the end, the extra work put in by the fabricator and the associated cost made selling it unwise. I could not be happier with the result as this is a top notch trailer and I'm super excited to start using it this fall.
Ok so the details:
the top weighs about 125 lbs complete and isIMAG0075.jpgIMAG0077.jpg able to hold around 1000 lbs safety static load and about 200 lbs dynamic load (this is more to do with the rack mount than the actual lid).
the lid will be completely waterproof and is sealed using the same automotive bulb seal Adventure trailers uses to seal their chaser and horizon models. It also will have a drip edge extended down to further enhance the sealing of the lid to the tub.
the rack mount consists of thule TB 60 tracks. they are currently not installed yet but can be free of charge. they will be set in a custom 1" tubular rail running on the underside of the trailer top and x braced for support
the lid will also come with custom stainless steel AGS gas springs that are tunable, you can decrease the pressure inside to suit your needs, currently they are set at 990 nm of force or about 220lbs each.
stainless steel hinges (3) are being installed on the passenger side as is with adventure trailers
stainless steel draw latches (2) that are pad lockable are being installed on the other side.
Lined interior, fenders, front nose face
Re-wired for 12 volt operation with 4 pin plug
Functional hand parking brake intact with the cables and lines lubed for ease of operation.
Original M101cdn tarp cover is included with the sale
Original style Tires in excellent condition - no cracks or dry rot of loss of air pressureIMAG0146.jpgIMAG0075.jpgIMAG0077.jpgIMAG0147.jpg