M416 hybrid (updated w lots O' Pics)

[preacherman]

I have been threatening to build a trailer for a while when this week I finially found a reason. This week I acquired a m416 tub that is solid and ready to become a trailer. I have the tub, axles, leaf springs and hangers but nothing else. Considering I paid $96 I'm not complaining about the little detail that I am missing a frame...

I am not worried about finding an original frame bc I like the idea of building my frame to my measurements and desires. This will allow me to do things like make a longer front section for a trailer tongue box or a max coulpler as well as add features i want. This will also let me save time by not having to hunt down an old frame.

So my first question on this build is thus...if building an m416 frame from scratch what would you use. I am thinking 2x2 square tubing. I want it to be heavy enough to withstand being used but light enough to pull behind a lifted jeep.

Also does anyone have exact measurements of an 416 frame? I could use that to start from.

[SWITAWI]

Closest thing I could find - http://forum.ih8mud.com/trailer-tech...ons-specs.html

[Smksignals]

M416 frame in So Cal -

http://www.expeditionportal.com/foru...99#post1003399

[bob]

2x2 120 wall should be more than enough for your build. Looking forward to seeing it develop. Great buy!!!!!

[Hill, Bill E.]

M416 frame in So Cal -

http://www.expeditionportal.com/foru...99#post1003399

Not sure what that is, but it's not an M416 frame.

Preacherman, I have the M416 manual in PDF form. If you PM me your email, I can send it to ya. (can't figure out how to post it here )

Like bob said, 2x2x.120 wall will be more than adequate.

[preacherman]

Thanks, pm sent

[Hill, Bill E.]

Thanks, pm sent

Hopefully got it emailed to you.

You may end up with 2-3 emails from me, since I had to figure out how to send/attatch it!

[socaljeeper]

I think most off road trailer manufactures go with 2"x3"x.120 for thier frames. I used 2"x3" for my trailer. It is plenty strong and it gives you and extra inch of room for whatever. Think about what accersories you will be putting on the trailer like racks, lighting, spare tire and how they will attach.

[preacherman]

The more I think about it the more I am leaning towards 2x3. It looks like the original steel used was 2x3. 2x3 would also better accommodate some of the plans I have for it.

[Hill, Bill E.]

The original M416 frame is made from a 2x3 "C" channel, instead of 'box' tube.

I think you would be better off using the 2x3 box style tube like you say. It will be stronger, and accommodate any additions, like a rear receiver for bike racks, etc.

The extra weight will be down low, so the COG shouldn't be effected very much.