Cut the missing threads:
Made some room for the hose connection:
And started with the second one:
Put the 3 jaw back in the lathe:
This piece of 1.2713 (203052psi) will be used for the four ram mounting bolts:
Turned it down:
And put some threads on it:
Put it in the mill:
First one finished:
Nicely done Steinez! I am looking forward to seeing the rams mounted and the way that they will work. Good machining...
Machined the second bolt:
Got the two missing rams:
Put the Hägglund on hold until the Motodog is finished:
Steinez, you need to make a thread here on Expo showing us all about your Motodog?
Well yaa! We are your fans
. It's all inter related. Duh. We are your fans dude!
Sent from my LS670 using Tapatalk 2
Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
Steinez you should just make a thread called the RedneckGarage and put all your projects in there...