what did you do to your trailer today?

[java]

Took a load to the dump!

Mark is that just a bungee holding the propane tank in? Does it seem secure enough?

[GREENI]

I'll play...
Today I bought some steel to cap some open box section...
I'll get pics up soon, it's a Sankey...

[Dirtytires]

Yeah,,,

[Mark Harley]

Java:

The cage holds the tank from the top and bottom.
The sides cradle the sides.
The bungie wraps around and hooks to the pins with light pressure.
It cant rise up or drop down.
The bungie holds the tank tight against the back.

Look close you can see the 1/4" bolt that passes through the trailer and bolts the
frame to the tub, It is long enough to pass through the propane tank handle then I use a rubber washer and NYLOCK wing nut to tighten it all
down.

No movement and if the bungie would snap or get cut The tank is locked to the cage.

[java]

Ah didn't catch that top nut going thru the tank handle. I may just copy that for a 20# tank.

[TheThom]

I put the 3rd (and final) coat of Epoxy on the underside of the floor. Next step is to paint on the bed-liner and then screw it to the frame.

[Maximus Ram]

Which one...the Willys Truck bed trailer , I got tail-lights hooked up and working and made a flip up license plate ....the flat-bed trailer I looked at....

[Butch1979]

Look at My build, I bent this mount at work.
It worked out great! and was almost free "lunch for the press operator"
The pin mounts are clevis pins from the hardware store.

Perfect! Will 5 gal tank run grill and tankless water heater for a while?

[Mark Harley]

The 5 I have does run for a good time, I am adding a hot water system and will add a 20# tank.
I have more faith in swapping the tank at walley world or the local gas station then finding a refill location.

[Dendy Jarrett]

I have cleaned the dust of winter off, swept and vacuumed. Perfect weather- Now- to find time to Go! WMAC, I feel ya brutha!
D