Waytec
Adventurer
I think I have this in the best place.
I picked up a canoe last fall that needs some TLC. It is getting warmer and the river has now opened up, So it is time to get this girl water ready.
I have ordered all the parts it needs from the local outdoor shop. but the hull of the boat has pitting holes and some damage on the keel due to being run into a rock or two.
I am wondering can I use Fiberglas body filler, sanding it down and doing several coats to fill in and reshape the damaged parts on the keel at the bow and stern.
I was then going to pant it with a marine pant and put Keel tape on the bow and stern keels to protect them. ( I will be river running with this boat)
I picked up a canoe last fall that needs some TLC. It is getting warmer and the river has now opened up, So it is time to get this girl water ready.
I have ordered all the parts it needs from the local outdoor shop. but the hull of the boat has pitting holes and some damage on the keel due to being run into a rock or two.
I am wondering can I use Fiberglas body filler, sanding it down and doing several coats to fill in and reshape the damaged parts on the keel at the bow and stern.
I was then going to pant it with a marine pant and put Keel tape on the bow and stern keels to protect them. ( I will be river running with this boat)