G'day from Australia. Motoz MN GLX R: Evolution of a Warrior

[Cruisn]

how hard was it to set the full sender up or were you able to retain the factory one?

[motoz]

It uses the factory sender so it's not an issue. I helped a mate fit one in his Hilux and it required lengthening of the sender float arm.

[motoz]

FINALLY IT ARRIVES!!!

After much delay, almost three months due to supply issues I got a knock at the door yesterday and signed for a new piece of kit.

I'd ordered one of the Runva 11XP winch's during a Xmas runout sale. After reviewing most of the specs of the import winches on paper and price point this unit was right up at the pointy end.



Included in the kit 11000lb winch with Dyneema Rope
600A Solenoid Pack with 32mm2 cables
3.6m Handheld Remote
Wireless Remote
Aluminium Hawse Fairlead
Clevis Style Safety Hook
Snatch Block
Winch Cover









Features:

Free spooling clutch
Winch power in and out via remote
Automatic braking action. (Screw Cone)
100% Waterproof competition grade Solenoids
High output series wound motor
Heavy duty robust construction
Full Steel 3 stage Runva patented planetary gearing



I really like the fact that the solenoid's are inside a steel housing. How it lasts time will tell though it looks

Here's the specs;

Rated Line Pull 11,000lb (4990kg)
Motor – Series Wound (12V) 4.9kW/6.5hp
Gear Reduction Ratio (12V) 230:1
Dyneema Winch Rope 11mm x 25M

I will endeavour to find the time to fit it over the next few weeks. It will be good to have the bar off as I've got a little bit of trail damage lurking behind that I need to repair.

To be continued...

[motoz]

Ok well winch is finally in. Got the whole job done in two hours. No blood spilled and very little swearing !!!

Off with the front bar...



winch mounted in the cradle...



wire it up and were in buisness...