Any one with a stock Discovery 1?

[Cleand]

Is there anyone with a stock disco 1 that could tell me the amount of travel on the rear axle before it hits the bump stops? Thanks

[JeremyT101]

Stock Disco 1 checking in. Are you basically looking for the measurement between the axle and the tip of the bumpstop?

[Cleand]

Stock Disco 1 checking in. Are you basically looking for the measurement between the axle and the tip of the bumpstop?

Yes please...

[JeremyT101]

Sorry!! had to move my GF into her new place yesterday, was a crazy long day. Ill get out there today and take the measurement!

[JeremyT101]

Rear axle to bump stop sitting on a level driveway with nothing in the back but a full tank of gas = 3"

[Cleand]

Perfect, thanks for your help.

[psykokid]

what are you up to Garrett?

[Mg-rover1]

He's going to put 40" Super swampers Boggers.

[psykokid]

He's going to put 40" Super swampers Boggers.

lol... how goes the fix the HG fund?

[Cleand]

I am running 33x12.50 and had fabricated some bump stops. Well I ended up trashing them on the Socal Expo trip. So I made some beefy ones out of 1/4 inch steel. I was just wondering if maybe I did not have enough up travel. I think I have them just right, because if I go any shorter they will not make contact with full flex.